2024 Vermeer® BC2100XL Base

Information

2024 Vermeer® BC2100XL

With a 21-in (53.3-cm) capacity and the largest infeed table in its class, the BC2100XL allows for smooth material feeding. Offset horizontal feed rollers have theoretical combined 10,000 lb (4536.9 kg) of pulling force and allow for easier feeding of material and less need for manual control of the upper feed roller when chipping large-diameter material. The exclusive SmartCrush system provides increased down pressure on the material being fed and assists when feeding forked or branchy material.

Features may include:

SmartFeed system

Improve productivity with the SmartFeed system, which monitors engine rpm and senses jams, automatically stopping or reversing the rollers as needed.

3-year/3000-hour extended limited warranty

Protect your investment with a 3-year/3000-hour extended limited warranty on drum housings, cutter drums, shaft and ring-feeder hubs.

Photos

Highlights

  • Jasper, Georgia
  • 2024
  • Vermeer®
  • BC2100XL Base
  • QSB
  • Tongue Description: 2.5" x 4.5" x .38" (6.4 cm x 11.4 cm x 1 cm) / Extension: Two position 12" extension (30.5 cm) | Fender Description: Bolt-on
  • Ultra-low sulfur diesel
  • Available
  • 95.8 in | Infeed Table: 72 in | drum: .5 in
  • 116.5 in | Infeed Hopper: 38.5 in | Chute: 116 in

Specifications

  • 2024
  • Vermeer®
  • BC2100XL
  • Base
  • Brush
  • QSB
  • Cummins | Dodge | Option One: Dexter
  • 4.9 CID
  • Tier 4 Final
  • 6
  • Gross (Maximum): 275 hp
  • 730 ft-lb
  • DF900P Series Fleetguard Direct Flow with integral precleaner and secondary element
  • Spin-on
  • Medium: Liquid
  • 3.4 in
  • Manufacturer: Eaton
  • Max Fuel Consumption: 14 gph
  • Ultra-low sulfur diesel
  • Drive Engagement: Clutchless PTO
  • Tandem torsion 8000 lb (3628.7 kg) capacity
  • Option One: 17.5" x 6.75" B.C. of 8 on 6.5" (16.5 cm)
  • Capacity - Option One: 235/75R17.5 load range J
  • Electric
  • 2 - 950 CCA
  • Switches: Engine speed, SmartFeed droop (non-remote only), EcoIdle™ engine control system | System Voltage: 12 volts | Shutdown System: Coolant temperature, intake manifold temperature, oil pressure
  • 130 amp Delco-Remy 245I
  • Feed: 100 ft/min | drum: 1084 rpm
  • System Type: Open center
  • Pump Flow at Maximum RPM: 13 gpm
  • System relief: 2750 psi | Auto Reverse: 2550 psi
  • 3600 cfm
  • Tongue Description: 2.5" x 4.5" x .38" (6.4 cm x 11.4 cm x 1 cm) / Extension: Two position 12" extension (30.5 cm) | Fender Description: Bolt-on
  • 2.5" x 8.75" (6.4 cm x 22.2 cm) C-channel
  • 3 " (7.6 cm) pintle
  • Trailer Type: LED | Safety Lock - Number of Positions: 4
  • Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 10 in | Feed Roller Dimension: 19 " (48.3 cm) | Infeed Throat Capacity: 40 in x 24 in | Distance from Feed Table to Ground: 30.8 in | Infeed Table Material Thickness: .4 in | Material Capacity: 21 in | Thickness: 28 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 5 " x 14 " (12.7 cm x 35.6 cm) | Bedknife Size: 3 " x 27.5 " (7.6 cm x 69.9 cm) | Bottom Thickness: .1 in | Top Thickness: .2 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg | Cutter Drive: Type Spherical roller
  • Feed Table Up, Tongue In: 235 in | Table Down, Tongue Extended: 259 in | Infeed Table: 60.5 in
  • 95.8 in | Infeed Table: 72 in | drum: .5 in
  • 116.5 in | Infeed Hopper: 38.5 in | Chute: 116 in
  • 26" (66 cm) suction
  • 65 gal
  • Oil Volume with Filter: 17.6 qt
  • Coolant Capacity (Engine and Radiator): 8.8 gal
  • Feed Roller Clamp Load: 3500 lbs
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic | Reset Method: Green-hold-to-run button | Positions: 4: E-stop, Forward, Neutral, and Reverse | Useable Edges: 2 | Number of Paddles: 4 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Rotation Type: Hydraulic | Filtration Method: 10 micron return, 100 mesh suction | Switches: Engine speed, SmartFeed droop (non-remote only), EcoIdle™ engine control system | Controller: C148 | Radio Remote Control: Engine speed, discharge chute, forward, stop, reverse feed, Smart Crush down pressure level, SmartFeed droop setting and engine stop. | Toolbox Description: Lockable
  • 24 gal
  • Option One: 16200 lbs | Tongue - Engine Option One: 2950 lbs | Of Feed Roller: 972 lbs | With Shaft: 1500 lbs
  • Recommended: API CJ-4 | hydraulic: Recommended: Vermeer Hy-Power 68
  • A8 chipper steel
  • 4 | Number of Bolts/Knife: 6
  • Belt Idler/Tensioner: Torsion arm spring-loaded | 5V chipper poly type