2024 Vermeer® AX19 Base

Information

2024 Vermeer® AX19

Equipped with mechanical feeding capabilities and a 173-hp (123-kW) John Deere diesel engine, this unit will efficiently work in large land-clearing operations or on a rural jobsite. The AX19 features up to 12,000 lb (5443.1kg) of pull-in force with the support of the patented SmartCrush control system, allowing you to feed large-diameter logs or branchy limbs with minimal effort. With no two jobs alike, the AX19 is built to finish the challenge.

Features may include:

Fixed infeed table

The fixed infeed table design and oversized infeed opening gives the operator improved performance and durability when mechanically feeding.

Dual offset horizontal feed rollers

Dual offset horizontal feed rollers lessens the need for the operator to manually control the machine when feeding large-diameter logs.

Winch option

When equipped with the winch option, the winch can be operated with or without the boom in place, which is easily removed with just six bolts. When removed it allows the operator to mechanically feed the chipper, without the winch structure interfering with the loading process.

Photos

Highlights

  • Jasper, Georgia
  • 2024
  • Vermeer®
  • AX19 Base
  • Model: 4045HFC09
  • Tongue Description: 5" x 3" x 0.375" | Extension: Extendable 12"
  • Diesel
  • Available
  • 79 in | Infeed Throat Capacity: 28.875" | Infeed Table: 71 in | drum/disc: .5 in
  • 108 in | Infeed Throat Capacity: 24" | Infeed Hopper: 35 in | Chute: 108 in

Specifications

  • 2024
  • Vermeer®
  • AX19
  • Base
  • Brush
  • Model: 4045HFC09
  • John Deere
  • 4
  • Gross Horsepower (Maximum): 173 hp
  • 492 ft-lb
  • 2 Stage Dry
  • Spin-on
  • Medium: Liquid
  • 2.5 in
  • 28.4
  • Manufacturer: White RE470
  • Max Consumption: 6.8 gph
  • Diesel
  • Type: 12" Spring Loaded | Drive Engagement: Manual Lever
  • Tandem Torsion 7000 lb capacity
  • Electric
  • 950 CCA
  • 90
  • System Voltage: 12
  • Feed: 119 ft/min | drum/disc: 1100
  • Actuation Force (BFSB): 34 lbs | Actuation Force: 34 lbs
  • System: Open Center
  • Pump Flow at Maximum RPM: 14.8 gpm
  • System relief: 3000 psi | Auto Reverse: 2800 psi
  • Tongue Description: 5" x 3" x 0.375" | Extension: Extendable 12"
  • 7.5" Z-Channel x 0.25" Thick
  • Pintle
  • Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 5 in | Feed Roller Dimension: 19" dia | Feed Roller Dimension (Two): 11" dia | Distance from Feed Table to Ground: 30.3 in | Infeed Table Material Thickness: .3 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 1.5 in | Material Thickness: 11 in | Material Capacity: 19 in | drum/disc Thickness: 26.1 in | drum/disc- Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 1.3 in | Bottom Thickness: .1 in | Top Thickness: .2 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg
  • Feed Table Up, Tongue In: 224 in | Table Down, Tongue Extended: 236 in | Infeed Table: 60.5 in | Feed Roller Dimension: 28.25 | Feed Roller Dimension (Two): 28.25
  • 79 in | Infeed Throat Capacity: 28.875" | Infeed Table: 71 in | drum/disc: .5 in
  • 108 in | Infeed Throat Capacity: 24" | Infeed Hopper: 35 in | Chute: 108 in
  • 26" Suction
  • Tank: 40 gal
  • Volume with Filter: 15.5 qt
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic | Number of Feed Roller Motors: 4 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Safety Lock - Number of Positions: 4 | Useable Edges: 2 | Number of Paddles: 12 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Type: Spherical Roller | Manufacturer: Linkbelt | Belt Idler/Tensioner: Spring loaded | Rotation Type: Worm gear with rotational lock | Filtration Method: 6 micron return, 100 micron suction | Fender Description: Bolt-on
  • Feed Roller Clamp Load: 4000 lbs
  • Tank: 20 gal
  • Without winch and hydraulic jack: 11000 lbs | with winch, hydraulic jack and hydraulic chute: 11400 lbs | of Feed Roller: 350 lbs | Option Two: 186 lbs | With Shaft: 1160 lbs
  • Recommended Oil: ACEA E-7 & E-6 or API CI-4 | HY POWER 68
  • Number of: 12 | Number of Bolts/Knife: 5
  • Drum/disc: A8 Modified Chipper Steel | Bedknife: 1018 CD
  • 5V