Current Vermeer® Rental Brush Chippers

2025 Vermeer® Brush Chippers BC900XL

2025 Vermeer® Brush Chippers BC900XL

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Brush Chippers
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2025 Vermeer® Brush Chippers BC900XL

2025 Vermeer® Brush Chippers BC900XL

  • Year 2025
  • Manufacturer Vermeer®
  • Model Name Brush Chippers
  • Trim Name BC900XL
  • Generic Type (Primary) Brush
  • Airflow 3925 cfm
  • Bore 2.2 in
  • Engine Manufacturer Briggs and Stratton Vanguard
  • Engine Power Gross Horsepower (Maximum): 35 hp
  • Engine Torque, Maximum 53 ft-lb
  • Air Cleaner Engine-mounted
  • Oil Filter Spin-On
  • Cooling Medium: Air

2025 Vermeer® Brush Chippers BC900XL

SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.

The large infeed opening simplifies feeding irregular material and reduces the need for crosscuts before feeding the chipper.

Designed with ease of maintenance in mind, the BC900XL features a dripless oil filter and conveniently located grease points to help reduce service time.

The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • Enhanced chipping capabilities
  • Optimal access to key machine maintenance areas
  • Safety features built with the operator in mind

Engine

Airflow 3925 cfm
Bore 2.2 in
Engine Manufacturer Briggs and Stratton Vanguard
Engine Power Gross Horsepower (Maximum): 35 hp
Engine Torque, Maximum 53 ft-lb
Air Cleaner Engine-mounted
Oil Filter Spin-On
Cooling Medium: Air

Motor

Displacement 33.1 CID
Motor Type Manufacturer: White

Fuel System

Fuel System Max Fuel Consumption: 3.2 gph
Fuel Type Gasoline

Drivetrain

Clutch Drive Engagement: Clutchless PTO

Suspension

Suspension 3500 lb (1587.6 kg)

Battery

Battery Group 24 - 580 CCA

Electric

Electrical System: 12 V
Alternator 20 amp

Operational

Operating Speed Feed: 140 ft/min | 1500 rpm
Operating Conditions Actuation Force (BFSB): 34 lbs

Hydraulics

Hydraulic Type System Type: Tandem Center
Hydraulic Pump Pump Flow at Maximum RPM: 5 gpm
Maximum Pressure System relief: 2500 psi | Auto Reverse PSI: 2300 psi

Chassis

Chassis Tongue Description: 3" x 5" 3/16" (7.6 cm x 12.7 cm x .5 cm) Tube
Frame Type 3/16 in. x 5-5/8 in. (.5 cm x 14.3 cm)
Hitch/Type Pintle or ball

Dimensions

Dimensions Feed Roller Dimension: 15.8" dia x 13.5" long (40 cm x 34.3 cm) | Infeed Throat Capacity: 9 in x 14 in (22.9 cm x 35.6 cm) | Pinch Point - Distance to End of Feed Table: 65 in | Distance from Feed Table to Ground: 29 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 2 in | Material Thickness: .1 in | Material Capacity: 9 in | Thickness: 1 in | Diameter: 33 in | Knife Thickness: .6 in | Knife Size: 5" x 11.75" (12.7 cm x 29.8 cm) | Bedknife Size: 5" x 12.1" (12.7 cm x 30.7 cm) horizontal and 5" x 8.8" (12.7 cm x 22.4 cm) vertical | Bedknife Thickness: .8 in | Bottom Thickness: .1 in | Top Thickness: .1 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg
Length Feed Table Up, Tongue In: 140.4 in | Table Down, Tongue Extended: 154.8 in | Infeed Table: 26 in
Width 79.5 in | Infeed Table: 48 in
Height 97 in | Infeed Hopper: 32 in | Chute: 96.7 in

Capacities

Fuel Capacity 16 gal
Oil capacity Oil Volume with Filter: 2.9 qt
Features Dynamic Capacity: 31400 lbs | Static: 53500 lbs
Load Capacity, Land Feed Roller Clamp Load: 560 lbs
Hydraulic Capacity 6.8 gal

Weights

Weight Of Feed Roller: 210 lbs | With Shaft: 330 lbs

Features

Features Feed Roller Orientation: Horizontal | Number of Feed Rollers: 1 | Feed Roller Clamp Type: Spring/weight | Number of Feed Roller Motors: 1 | Reset Method: Dual green hold-to-run buttons | Positions: Four positions: Emergency stop, forward, stop and reverse | Safety Lock - Number of Positions: 6 | Useable Edges: 2 | Number of Paddles: 2 | Fixture Method: Bolt-on | Bedknife - Number of Useable Edges: 2 | Number of Bearings: 2 | Rotation Type: Manual dual handles with pin lock | Filtration Method: 10 micron return | Fender Description: Bolt-on
Oil Type Recommended: 10W30 | Vermeer VMF Gold
Construction Material A8 chipper steel | Bedknife: Grade 50
Belt Type Chipper - Polyester Cord with wrap
Knife Quantity 12 | 2 | Number of Bolts/Knife: 5

Product Photography