Current Vermeer® Rental Brush Chippers

2025 Vermeer® Brush Chippers BC700XL

2025 Vermeer® Brush Chippers BC700XL

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Brush Chippers
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2025 Vermeer® Brush Chippers BC700XL

2025 Vermeer® Brush Chippers BC700XL

  • Year 2025
  • Manufacturer Vermeer®
  • Model Name Brush Chippers
  • Trim Name BC700XL
  • Generic Type (Primary) Brush
  • Bore 1.5 in
  • Engine Power 25 hp
  • Airflow 5000 cfm
  • Engine Manufacturer Kohler ECH740
  • Air Cleaner Kohler HD 2-Stage Dry
  • Engine Type Flange-mounted ball type, self-aligning

2025 Vermeer® Brush Chippers BC700XL

Easily move from jobsite to jobsite with the smallest member of the Vermeer brush chipper line.

A large infeed opening simplifies feeding irregular material and reduces the need for crosscuts before feeding the chipper.

SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.

The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism in an emergency.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • Move from jobsite to jobsite with ease
  • Maximum productivity while minimizing maintenance
  • Safety features designed with the operator in mind

Engine

Bore 1.5 in
Engine Power 25 hp
Airflow 5000 cfm
Engine Manufacturer Kohler ECH740
Air Cleaner Kohler HD 2-Stage Dry
Engine Type Flange-mounted ball type, self-aligning

Motor

Displacement 14
Motor Type Manufacturer: White Hydraulics

Fuel System

Fuel Type Gasoline

Suspension

Suspension 2000 lb/(907.2 kg) rubber torsion axle

Battery

Battery Group 26, 400 CCA

Electric

Electrical System Voltage: 12 Volt

Operational

Operating Speed Feed: 49.4 ft/min | 1748 | Max Fuel Consumption: 2.4 gph

Hydraulics

Oil Filter Spin-on
Hydraulic Type System Type: Open center
Hydraulic Pump Pump Flow at Maximum RPM: 3.8 gpm
Maximum Pressure System relief pressure: 2500 psi

Chassis

Frame Type 3/16"/(.5 cm) ASTM A1011 steel
Hitch/Type 2"/(5.1 cm) ball coupler

Dimensions

Dimensions Feed Roller Minimum Distance to Drum: 4 in | Feed Roller Dimension: 10" Diameter | Infeed Throat Capacity: 6" x 8" (15.24 cm x 20.32 cm) | Pinch Point - Distance to End of Feed Table: 65.4 in | Distance from Feed Table to Ground: 28.1 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 12" (30.48 cm) | Diameter: 2 in | Material Thickness: .1 in | Material Capacity: 6 in | Thickness: 1.3 in | Diameter: 23.9 in | Knife Thickness: .6 in | Bedknife Size: 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert | Bottom Thickness: .1 in | Top Thickness: .1 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 240 deg | Fender Description: .1"/(.3 cm) Steel bolt-on
Length Feed Table Up, Tongue In: 115 in / Table Down, Tongue Extended: 136 in | Infeed Table: 30.2 in
Width 71 in | Infeed Table: 41.2 in | 8 in
Height 102 in | Infeed Hopper: 22.1 in | Chute: 97.2 in

Capacities

Fuel Capacity 6 gal
Hydraulic Capacity 6.8 gal
Load Capacity, Land Feed Roller Clamp Load: 525 lbs
Features Dynamic Capacity: 5640 lbs | Static: 4460 lbs | Torque (max): 41.7 ft-lb

Weights

Weight 1800 lbs | Tongue option one: 180 lbs | Of Feed Roller: 100 lbs | With Shaft: 176 lbs

Features

Features Feed Roller Orientation: Horizontal | Feed Roller Clamp Type: Spring/Feed Roller Weight | Reset Method: Dual green hold-to-run buttons | Positions: Four position: (E-Stop), Forward, Stop, (Reverse) | Fixture Method: Welded | Belt Idler/Tensioner: Spring-loaded adjustable Idler | Rotation Type: Manual | Filtration Method: Return flow filtration, 10 micron
Oil Type Recommended: Kohler oil or API CH4/SJ
Construction Material A8 Chipper Steel | Bedknife: ASTM A572 Grade 50
Belt Type 2-band 5-V profile Aramid

Product Photography