Current Vermeer® Rental Brush Chippers

2025 Vermeer® Brush Chippers BC1200XL

2025 Vermeer® Brush Chippers BC1200XL

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Brush Chippers
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2025 Vermeer® Brush Chippers BC1200XL

2025 Vermeer® Brush Chippers BC1200XL

  • Year 2025
  • Manufacturer Vermeer®
  • Model Name Brush Chippers
  • Trim Name BC1200XL
  • Generic Type (Primary) Brush

2025 Vermeer® Brush Chippers BC1200XL

A powerful 115-hp (85.8-kW) Origin® engine with electronic fuel injection enhances fuel economy and boosts engine response under load.

Get more done thanks to the aggressive feeding action of dual horizontal offset feed rollers that can be adjusted for optimal clamping force when feeding.

SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.

The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.

The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • Get more done with the aggressive feeding action
  • Intelligent feeding for the toughest jobs
  • Safety features designed with the operator in mind

Motor

Motor Type Manufacturer: White Hydraulic

Suspension

Suspension Torsion

Battery

Battery Group 31; 950 CCA

Electric

Electrical System Voltage: 12 volt | Switches: Lower feed stop bar senstivity, toggle, SmartFeed and Ecoldle | Controller: Vermeer ACS | Display: LCD | Shutdown System: High temperature, low pressure
Alternator 70 Amp

Operational

Operating Speed 2000 rpm | Feed: 110 ft/min
Operating Conditions Actuation Force: 34 lbs

Performance

Noise Level 124 dB(a)

Hydraulics

Hydraulic Type System Type: Open center, dual pumps
Hydraulic Pump Pump Flow at Maximum RPM: 4.1 gpm
Maximum Pressure System relief: 2500 psi | Auto Reverse: 2500 psi
Airflow 2000 cfm

Chassis

Chassis Tongue Description: 2.5" x 4.5" x 0.38" (6.4 cm x 11.4 cm x 9.5 mm) | Tongue Extension: Extendable 18" (45.7 cm) | Fender Description: Bolt-on
Frame Type 7" (17.78) Z channel; 0.25" (0.64 cm) thickness
Hitch/Type Pintle

Lights and Safety

Safety Features Lock - Number of Positions: 2

Dimensions

Dimensions Feed Roller Minimum Distance to Drum: 1 in | Feed Roller Dimension: 15 | Feed Roller Dimension (Two): 11.1" (28.3 cm) | Infeed Throat Capacity: 13.3" x 17" (33.7 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 67.4 in | Distance from Feed Table to Ground: 27.2 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 2 in | Material Thickness: .1 in | Material Capacity: 13.3 in | Thickness: .4 in | drum: 20 in | Knife Thickness: .6 in | Knife Size: .625" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5" x 17.3" (8.9 cm x 43.8 cm) | Bedknife Thickness: 1 in | Bottom Thickness: .1 in | Top Thickness: .1 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg
Length Feed Table Up, Tongue In: 168 in | Table Down, Tongue Extended: 206 in | Infeed Table: 30.1 in
Width 79 in | Infeed Table: 52 in | Drum: 20 in
Height 103 in | Infeed Hopper: 32 in | Chute: 104 in
Fan Diameter 19" sucker

Capacities

Oil capacity Oil Volume with Filter: 7.8 qt
Cooling System Coolant Capacity (Engine and Radiator): 4 gal
Load Capacity, Land Feed Roller Clamp Load: 2650 lbs
Hydraulic Capacity Tank: 12 gal

Weights

Weight Of Feed Roller: 150 lbs | With Shaft: 480 lbs

Features

Features Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic cylinder | Number of Feed Roller Motors: 2 | Reset Method: Dual green hold-to-run buttons | Positions: Four positions: Emergency stop, forward, and reverse | Useable Edges: 2 | Number of Paddles: 5 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Rotation Type: Manual pivot with handle | Filtration Method: 10 micron return, 100 micron suction
Oil Type Recommended: SAE 10W30 | hydraulic Recommended: Vermeer VMF
Construction Material A8 chipper steel | Bedknife Material: 1018
Knife Quantity 8 / 2: 12 | Number of Bolts/Knife: 4

Product Photography