2024 Vermeer® BC1000XL Tier 4 Final 49 hp

Information

2024 Vermeer® BC1000XL Tier 4 Final 49 hp

Enhanced with the modern day operator in mind, the BC1000XL is available with either a Tier 4 Final 49-hp or 74-hp (36.4-kW or 55-kW) engine that meets all the latest emission regulations. When transporting the machine, expect smooth towing thanks to the rubber-torsion suspension.

Features may include:

25-gal (94.6 L) fuel tank

Keep up the pace because the BC1000XL comes with a 25-gal (94.6 L) fuel tank that lets you put in more hours before refueling.

Minimized maintenance

Minimize maintenance because once the shield is opened, belts can be changed without tools, and the clutchless PTO system eliminates the need to slide the engine.

Patented bottom feed stop bar

Provides operator safety with the patented bottom feed stop bar. The four-position upper feed control bar with dual stop positions and forward/reverse feed positions mounts over the feed table and enables the operator to stop the feed rollers and select forward or reverse operations.

Photos

Highlights

  • Jasper, Georgia
  • 2024
  • Vermeer®
  • BC1000XL Tier 4 Final 49 hp
  • Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) / Extension: Extendable 24" (61 cm) @ 12" (30.5 cm) increments
  • Diesel
  • Available
  • 66.5 in | Infeed Table: 52 in | 20 in | Infeed Throat Capacity: 17" (43.2 cm)
  • 101 in | Infeed Hopper: 12 in | Chute: 101 in | Infeed Throat Capacity: 12" (30.5 cm)

Specifications

  • 2024
  • Vermeer®
  • BC1000XL Tier 4 Final
  • 49 hp
  • Brush
  • Deutz | Linkbelt | Option Two: Dexter
  • 28.3
  • Tier 4 Final
  • 4
  • Maximum: 49 hp
  • 108 ft-lb
  • 2-stage dry with safety element
  • Spin-on
  • Medium: Liquid
  • 2.4 in
  • Manufacturer: White
  • Max Fuel Consumption: 3 gph
  • Diesel
  • Clutchless PTO | Drive Engagement: Belt tensioner
  • Torsion
  • Option Two: ST235/80R16 Load Range E
  • Group 31; 950 CCA
  • System Voltage: 12 Volt
  • 95 Amp
  • Feed: 105 ft/min | 2050 rpm
  • Actuation Force: 34 lbs
  • System Type: Tandem center
  • Flow at Maximum RPM: 2.7 gpm
  • System relief: 2500 psi
  • Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) / Extension: Extendable 24" (61 cm) @ 12" (30.5 cm) increments
  • 7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness
  • Pintle
  • Trailer Type: LED
  • Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 1 in | Feed Roller: 20" x 17" (50.8 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 66.5 in | Distance from Feed Table to Ground: 26 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Material Capacity: 12 in | Thickness: .4 in | Diameter: 20 in | Knife Thickness: .6 in | Knife Size: 0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5" x 17.3" (8.9 cm x 43.8 cm) | Bedknife Thickness: 1 in | Chute Rotation Angle: 270 deg |
  • Feed Table Up, Tongue In: 160 in | Table Down, Tongue Extended: 208 in | Infeed Table: 32 in
  • 66.5 in | Infeed Table: 52 in | 20 in | Infeed Throat Capacity: 17" (43.2 cm)
  • 101 in | Infeed Hopper: 12 in | Chute: 101 in | Infeed Throat Capacity: 12" (30.5 cm)
  • 15" (38.1 cm) suction
  • Option Two: 16" x 6" (40.6 cm x 15.2 cm)
  • 25 gal
  • Volume with Filter: 8.4 qt
  • Capacity (Engine and Radiator): 2.9 gal
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 1 | Number of Feed Roller Motors: 1 | Reset Method: Green hold-to-run button | Positions: 4: E-stop, forward, neutral and reverse | Safety Lock - Number of Positions: 2 | Useable Edges: 2 | Number of Paddles: 5 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Type: Spherical rollers | Rotation Type: Rotation handle with pin lock | Filtration Method: 10 micron return; 100 micron suction | Gauges: MFD, hour | Switches: Feed Stop Bar Sensitivity, Droop, Ecoldle | Controller: Vermeer ACS | Display: Multifunctional display (MFD)
  • Feed Roller Clamp Load: 350 lbs
  • 7 gal
  • Option Two: 4995 lbs | Tongue - Option Two: 600 lbs | Of Feed Roller: 400 lbs | With Shaft: 460 lbs
  • Recommended: 10W30 | hydraulic Recommended: Vermeer VMF
  • A8 chipper steel | Bedknife: 1018 | Fender Description: Bolt-on-steel
  • 5V
  • 2 | Number of Bolts/Knife: 4