Current Vermeer® Renewable-Energy Whole Tree Chippers

2025 Vermeer® Whole Tree Chippers WC2500XL

2025 Vermeer® Whole Tree Chippers WC2500XL

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Whole Tree Chippers
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2025 Vermeer® Whole Tree Chippers WC2500XL

2025 Vermeer® Whole Tree Chippers WC2500XL

  • Year 2025
  • Manufacturer Vermeer®
  • Model Name Whole Tree Chippers
  • Trim Name WC2500XL
  • Generic Type (Primary) General

2025 Vermeer® Whole Tree Chippers WC2500XL

SmartCrush technology allows you to increase down pressure when difficult material enters the cutting drum.

A compact design to maneuver more easily in the woods, on tight jobsites and down narrow paths, but packs 600 hp (447 kW) of power to meet your production demands.

With the variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine, not pushing the material through.

Self-adjusting hydraulic dry clutch provides consistent engagement, helping to prolong clutch life, minimize maintenance cost and optimize operator efficiency.

Easy knife change-out system to help reduce maintenance on the jobsite.

High-wear material flow areas of the machine — like the drum, discharge chute, cutter housing and infeed conveyor floor — are designed with replaceable bolt-in wear parts to help extend machine life.

Features may include:

  • Expand your revenue stream with more flexibility
  • Designed with the operator in mind
  • Focus more on productivity and less on maintenance

Motor

Motor Type Drive: WS-Series

Drivetrain

Displacement Drive: 6.9 cu-in (113.1 cu-cm)
Driveline Planetary: Auburn Model 9 | Manufacturer: White

Suspension

Suspension Dual axle | Leaf spring

Wheels & Tires

Wheels 22.5 x 14 aluminum
Tires, Rear Specification 385/65R22.5 Super Single

Battery

Battery Group 8D 1400 CCA (dual)

Electric

Electrical 24V

Operational

Operating Conditions 1169 rpm
Operating Speed Feed Roller Speed: 98 ft/min (29.9 m/min)

Performance

Noise Level 121

Hydraulics

Hydraulic Type Open-center
Hydraulic Flow 16 gpm (60.6 L/min)
Maximum Pressure Feed Roller Down Pressure: 1530 | System relief pressure: 4000 psi (275.8 bar) | Auto Reverse PSI: 3750 psi (258.6 bar)

Chassis

Frame Type 10" x 4" x .375" wall rectangular tubing
Hitch/Type Pintle

Dimensions

Transport Length Maximum: 29.8 ft
Transport Height Maximum: 10.9 ft
Transport Width Maximum: 108 in
Length Maximum (Operation): 29.8 ft
Height Maximum Feed: 27 in | Chute: 132 in
Roller Diameter Infeed: 28 in | Feed Roller Distance to Drum: 1 in
Width 34 in | Infeed Roller: 34 in | Feed Table: 98 in
Dimensions Material Capacity: 25 in | Thickness: .5 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 17 | Bedknife Size: 34" wide | Bedknife Thickness: 1.5 in | Bottom Thickness: .1 in | Wear Plate Thickness: .2 in | Top Thickness: .2 in | Side Wall Thickness: .2 in | Deflector Thickness: .2 in | Side Deflector Angle: 14 deg | Up Deflector Angle: 22 deg | Down Deflector Angle: 14 deg | Grapple Handle: 30" wide | Infeed Slope: 6 deg

Capacities

Tank Type 33 gal
Fuel Capacity 18740

Weights

Weight 38000 lbs | Tongue: 7500 lbs | With Shaft: 3163 lbs | Infeed Roller: 575 lbs

Features

Chain Type Number of Infeed: 2
Oil Type Hy-Power 68, 46, or 32
Conveyor Type Dual independent chain
Features Safety Lock - Number of Positions: 4 | Useable Edges: 1 | Number of Bolts/Knife: 5 | Replaceable Threaded Knife Block: Hex nut (4) per knife | Fixture Method: Bolt | Bedknife - Number of Useable Edges: 2 | Number of Pockets: 4 | Tooth Design: Straight knives | Feed Roller Orientation: Horizontal | Number of Feed Rollers: One upper, one conveyor | Number of Knives: 12 | Rotation Type: hydraulic | Rotational Lock:hydraulic | Flow Control: Two-feed roller and infeed conveyor | Switches: Push button | Controller: Danfoss MC-050 | Toolbox Description: Lockable | Tongue Description: Fixed with skidder grab
Construction Material .50" thick | A8 chipper steel | Bedknife Material: Cold-formed low-carbon bar | Fender Description: Jeep style (steel)

Product Photography