2025 Vermeer® Whole Tree Chippers WC2500TX
- Year 2025
- Make Vermeer®
- Model Whole Tree Chippers
2025 Vermeer® Whole Tree Chippers WC2500TX
2025 Vermeer® Whole Tree Chippers WC2500TX
A compact design to maneuver more easily in the woods, on tight jobsites and down narrow paths, but packs 600 hp (447 kW) of power to meet your production demands.
With the variable-speed, dual-infeed conveyor chains operators can concentrate on loading the machine, not pushing the material through.
With the variable-speed, dual-infeed conveyor chains operators can concentrate on loading the machine, not pushing the material through.
Efficiently move the machine around jobsites without the need for additional support equipment. The track undercarriage offers 29 in (73.7 cm) of belly clearance and rising chain rollers for material cleanout.
The ACS monitors the machine's health.
Features may include:
- Enhanced maneuverability wherever the job may take you
- Productivity and versatility to complete the job
- User-friendly operation for confidence on the job
Motor
Motor Type
Drive: WS-Series
Drivetrain
Displacement
Drive: 6.9 cu-in (113.1 cu-cm)
Driveline
Planetary: Auburn Model 9 | Manufacturer: White
Suspension
Suspension
Dual axle | Leaf spring
Battery
Battery
Group 8D 1400 CCA (dual)
Electric
Electrical
24V
Operational
Operating Conditions
1169 rpm
Ground Pressure
8.4 psi
Operating Speed
Feed Roller Speed: 98 ft/min
Performance
Noise Level
122
Hydraulics
Hydraulic Type
Open-center
Hydraulic Flow
16 gpm | Track: 38 gpm
Maximum Pressure
Feed Roller Down Pressure: 1530 | System relief pressure: 4000 psi | Auto Reverse PSI: 3750 psi | Track: 4786 psi
Chassis
Frame Type
8" x 4" x .375" wall rectangular tubing
Dimensions
Track Width
Pad: 20 in
Transport Length
Maximum: 26.1 ft
Transport Height
Maximum: 11.6 ft
Transport Width
Maximum: 118 in
Length
Maximum (Operation): 28.4 ft
Roller Diameter
Infeed: 28 in | Feed Roller Distance to Drum: 1 in
Width
34 in | Infeed Roller: 34 in | Feed Table: 98 in
Dimensions
Material Capacity: 25 in | Thickness: .5 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 8.5 to17 | Bedknife Size: 34" wide | Bedknife Thickness: 1.5 in (3.8 cm) | Bottom Thickness: .1 in (.3 cm) | Wear Plate Thickness: .2 in (.5 cm) | Top Thickness: .2 in (.5 cm) | Side Wall Thickness: .2 in (.5 cm) | Deflector Thickness: .2 in (.5 cm) | Side Deflector Angle: 14 deg | Up Deflector Angle: 22 deg | Down Deflector Angle: 14 deg | Infeed Slope: 6 deg | Bottom Thickness 2: .1 in (.3 cm) | Wear Plate Thickness 2: .2 in (.5 cm) | Top Thickness 2: .2 in (.5 cm) | Side Wall Thickness 2: .2 in (.5 cm) | Deflector Thickness 2: .2 in (.5 cm) | Up Deflector Angle 2: 18 deg | Down Deflector Angle 2: 90 deg | Track Gauge: 97 in | Track Pitch: 132 in
Height
Maximum Feed: 27 in | Chute: 132 in | Chute 2: 194.5 in
Capacities
Tank Type
33 gal | Track: 33 gal
Weights
Weight
With Shaft: 3163 lbs | Infeed Roller: 575 lbs
Features
Chain Type
Number of Infeed: 2
Oil Type
Hy-Power 68, 46, or 32
Conveyor Type
Dual independent chain
Construction Material
.50" thick | A8 chipper steel | Bedknife Material: Cold-formed low-carbon bar
Features
Safety Lock - Number of Positions: 2 to 4 | Useable Edges: 1 | Number of Bolts/Knife: 4 or 5 | Replaceable Threaded Knife Block: Hex nut (4) per knife | Fixture Method: Bolt | Bedknife - Number of Useable Edges: 2 | Number of Pockets: 2 or 4 | Tooth Design: Straight knives | Feed Roller Orientation: Horizontal | Number of Feed Rollers: One upper, one conveyor | Number of Knives: 12 | Rotation Type: hydraulic | Rotational Lock:hydraulic | Flow Control: Two-feed roller and infeed conveyor | Switches: Push button | Controller: Danfoss MC-050 | Toolbox Description: Lockable