2025 Vermeer® Whole Tree Chippers WC2300XL
- Year 2025
- Make Vermeer®
- Model Whole Tree Chippers
2025 Vermeer® Whole Tree Chippers WC2300XL
2025 Vermeer® Whole Tree Chippers WC2300XL
SmartCrush technology allows you to increase down pressure when difficult material enters the cutting drum.
With the variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine, not pushing the material through.
A CAT® C13 Tier 4 Final engine provides 440 hp (328 kW) of power to meet your jobsite demands. A Tier 3 engine option is available for less-regulated countries.
Two knife options allow the operator to select the knife that meets their end product sizing needs.
Built-in skid grab on the tongue allows it to be moved around onsite by a skidder or excavator.
A remote control allows operators to view engine parameters and change a variety of machine settings.
Features may include:
- Enhanced durability allows you to spend less time on maintenance
- Improved operator convenience
- Engineered for efficient material handling
Motor
Motor Type
Drive: WS-Series
Drivetrain
Displacement
Drive: 6.9 cu-in (113.1 cu-cm)
Driveline
Planetary: Auburn Model 9 | Manufacturer: White
Suspension
Suspension
Dual axle | Leaf spring
Wheels & Tires
Wheels
22.5 x 14 aluminum
Tires, Rear Specification
385/65R22.5 Super Single
Battery
Battery
Group 8D 1155 CCA (Dual)
Electric
Electrical
24V
Operational
Operating Conditions
1169
Operating Speed
Feed Roller Speed: 98 ft/min (29.9 m/min)
Performance
Noise Level
119 db(A)
Hydraulics
Hydraulic Type
Open-center
Hydraulic Flow
16 gpm (60.6 L/min)
Maximum Pressure
Feed Roller Down Pressure: 1530 | System relief pressure: 4000 psi (275.8 bar) | Auto Reverse PSI: 3800 psi (262 bar)
Chassis
Hitch/Type
Pintle
Frame Type
10" x 4" x .375" wall rectangular tubing
Dimensions
Transport Length
Maximum: 29.8 ft
Transport Width
Maximum: 98 in
Transport Height
Maximum: 10.9 ft
Length
Maximum (Operation): 29.8 ft
Height
Maximum Feed: 27 in | Chute: 132 in
Width
34 in | Infeed Roller: 34 in | Feed Table: 98 in
Roller Diameter
Infeed: 28 in | Feed Roller Distance to Drum: 1 in
Dimensions
Material Capacity: 23 in | Thickness: .4 in | Diameter: 36 in | Knife Thickness: .6 in (1.6 cm) | Knife Size: 8.5 | Bedknife Size: 34" wide | Bedknife Thickness: 1.5 in (3.8 cm) | Dimension of Pockets: 8.5 in (21.6 cm) | Bottom Thickness: .1 in (.3 cm) | Wear Plate Thickness: .2 in (.5 cm) | Top Thickness: .2 in (.5 cm) | Side Wall Thickness: .2 in (.5 cm) | Deflector Thickness: .2 in | Side Deflector Angle: 14 deg | Grapple Handle: 30" wide | Infeed Slope: 6 deg
Capacities
Tank Type
42 gal
Fuel Capacity
18740
Weights
Weight
32700 lbs | Tongue: 6750 lbs | With Shaft: 2200 lbs | Infeed Roller: 575 lbs
Features
Oil Type
Hy-Power 68
Chain Type
Number of Infeed: 1
Conveyor Type
Dual independent chain
Features
Safety Lock - Number of Positions: 8 | Number of Knives: 8 | Useable Edges: One | Number of Bolts/Knife: 4 | Replaceable Threaded Knife Block: Hex nut (4) per knife | Fixture Method: Bolt | Bedknife - Number of Useable Edges: 2 | Number of Pockets: 8 | Tooth Design: Straight knives | Feed Roller Orientation: Horizontal | Number of Feed Rollers: One upper, one conveyor | Number of Knives: 12 | Rotation Type: 14 | Rotational Lock: 22 | Flow Control: Two-feed roller and infeed conveyor | Switches Toggle: On/Off | Controller: ASM - C248 WC2300 | Toolbox Description: Lockable | Tongue Description: Fixed with skidder grab
Construction Material
.38" thick | A8 chipper steel | Bedknife Material: Cold-formed low-carbon bar | Fender Description: Jeep style (steel)