2024 Vermeer® D60x90 S3 HDD Base

Information

2024 Vermeer® D60x90 S3 HDD

The D60x90 S3 Navigator® horizontal directional drill is significantly more powerful and quieter than its predecessor — with the interactive Aurora® digital display to help you get the job done faster and more efficiently.

This machine packs all these valuable benefits into a modest footprint — making it an ideal fit for large commercial or confined urban jobsites.

With up to 60,000 lb (266.9 kN) of thrust and pullback — an impressive 17 hp (13 kW) increase over its previous model (D60x90 Navigator® horizontal directional drill) — the D60x90 S3 is the drill that will take your operation to a whole new level of productivity.

Features may include:

Impressive size

Modest footprint of just 100-in (254-cm) transport width and 26-ft (7.9-m) length makes it right for a range of installation specifications — even in congested urban jobsites.

Increased power

Up to 60,000 lb (226.9 kN) of thrust and pullback and 9250 ft-lb (12,202.4 Nm) of rotational torque helps you get the job done faster.

Significantly quieter

Guaranteed sound power rating of just 107 dB(A) – 12 dB(A) lower than its predecessor the D60x90 – resulting in reduced noise at operator’s ear [83 dB(A)], increased operator comfort and less noise disturbance in residential or urban areas.

DigiTrak® Aurora® touchscreen display

New interactive, full-color DigiTrak® Aurora® touchscreen display allows operators to load the bore plan via flash drive and view it on screen — eliminating hard copy plans.

Large open-top vise

Large open-top vise design allows passage of larger tooling for ease of tool removal and installation.

Convenient rod loading

Popular and proven rod loader design provides easy and reliable performance.

Photos

Highlights

  • Jasper, Georgia
  • 2024
  • Vermeer®
  • D60x90 S3 HDD Base
  • Ultra Low Sulfur Diesel
  • Available
  • With cab: 104 in

Specifications

  • 2024
  • Vermeer®
  • D60x90 S3 HDD
  • Base
  • Directional
  • Cat
  • Maximum: 2200 rpm
  • Gross: 202 hp
  • Turbo Charged
  • Maximum Spindle Torque (Low at Maximum Engine RPM): 9250 ft-lb | Maximum Spindle Torque (Medium at Maximum Engine RPM): 6810 ft-lb | Maximum Spindle Torque (High at Maximum Engine RPM): 3790 ft-lb
  • 275 cu-in
  • Tier 4 Final (EU Stage IV) / Tier 3 (EU Stage IV) / Tier 4 Final (EU Stage V)
  • Ultra Low Sulfur Diesel
  • Thrust: 60000 lbs | Pullback: 60000 lbs
  • Maximum Carriage Speed at Maximum Engine RPM: 175 ft/min | Maximum Carriage Speed in Low at Maximum Engine RPM: 55 ft/min | Maximum Spindle Speed at Max Engine RPM: 200 rpm | Maximum Ground Drive Speed at Maximum Engine RPM: 3.7 mph
  • At Operator's Ear: 83 dB(A)
  • Auxiliary Pump Flow at Maximum Engine RPM: 13.4 gpm | Thrust/Pullback Pump Flow at Max Engine RPM: 41 gpm | Rotation Pump Flow at Maximum Engine RPM: 55 gpm | maximum: 150 gpm
  • Auxiliary Pump Relief Pressure: 3000 psi | Thrust/Pullback Pump Relief Pressure: 5500 psi | Rotation Pump Relief Pressure: 5800 psi | 900 psi
  • Angle of Approach: 18 deg | Maximum Operating Angle (Fore/Aft): 30 continuous/45 intermittent | Maximum Operating Angle (Left/Right):: 30 continuous/45 intermittent | Drill Rack Angle: 15.6 deg | Joint Inside Diameter: .8 in | Minimum Bend Radius: Minimum Bend Radius 169 ft
  • Minimum: 354 in
  • Minimum: 90 in
  • Minimum: 104 in
  • With cab: 104 in
  • Minimum Diameter: 6 in
  • 90 gal
  • Tank: 75 gal | System: 100 gal
  • 42150 lbs
  • Breakout System: Open top Vise | Brand: Kerr