2025 Vermeer® Pipeline Trenchers T1055III
- Year 2025
- Make Vermeer®
- Model Pipeline Trenchers
- Engine C13 ACERT
2025 Vermeer® Pipeline Trenchers T1055III
2025 Vermeer® Pipeline Trenchers T1055III
Perform rock excavation effectively with minimal chain wear due to its low-speed, high-torque, splined headshaft motor.
SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
Complimentary to the sectionalized booms, the crumber can be adjusted to accommodate a variety of digging depths.
The elevating cab allows optimal visibility and added comfort with the air ride seat.
The sealed cab has self-contained heating and air conditioning with sound attenuating foam.
It is also a rollover protective module (ROPM) and provides falling object protection (FOPS).
Features may include:
- For trenching projects requiring high horsepower and deep digging depths, Vermeer offers the T1055 trencher
- When you encounter tough trench digging conditions, the engine speed drops, increasing the torque for more power to pull through
Engine
Cylinder Liners
6
Emissions
Tier 3
Oil Filter
Full Flow
Rated Engine Speed
2100 rpm
Engine Manufacturer
Caterpillar
Engine
C13 ACERT
Engine Power
Gross: 415 hp
Cooling
Medium: Liquid
Air Cleaner
Dry-type exhaust aspirated
Aspiration
Turbocharged and air-to-air aftercooled
Fuel System
Fuel System
Fuel Consumption at Full Load: 20.9 gph
Drivetrain
Drive System
Track Drive Type: Dual path hydrostatic with planetary transmission
Brakes
Brake System Type
Service: Hydrostatic
Parking Brake
spring-applied, hydraulic release, wet disc brake
Electric
Electrical
System: 24 Volt DC
Operational
Operating Conditions
Operating Range: 8.8 hours
Operating Speed
Maximum Ground Speed - Low: 57.1 ft/min | Conveyor Belt Speed Range: 0-1070 fpm (0-326 m/min) | Maximum Ground Speed - High: 114 ft/min
Hydraulics
Maximum Pressure
Setting: 2500 psi
Ground Pressure
Minimum: 9.4 psi / Maximum: 13.9 psi
Hydraulic Pump
Pump Flow at Maximum RPM: 27.9 gpm
Pump Type
pressure-and-flow-compensated (load-sensing)
Dimensions
Track Width
Pad Ranges: 24" (61 cm) or 30" (76.2 cm)
Width
Ranges: 116"-122" (294.6 cm - 309.9 cm) | belt: 30 in
Height
Range: 135" (342.9 cm) | Discharge Range: 64"-78" (162.6 cm - 198.1 cm)
Length
with 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom: 32.2 ft | with 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom: 34.7 ft | with 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom: 37.2 ft | with 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom: 39.7 ft | with 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 41 ft | with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom: 38.3 ft | with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom: 40.8 ft | track: 176 in | conveyor: 108" or 168" (274.3 cm or 426.7 cm)
Dimensions
Approach Angle: 16 deg | Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 35 deg | Conveyor Shift Distance Range: 5" and 65" (12.7 and 165.1 cm) | with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom: 35.8 ft
Capacities
Fuel Capacity
184 gal
Oil capacity
152 gal
Weights
Weight
Range: 87,000 lb - 124,000 lb (39,463.5 kg - 56,245.5 kg)
Features
Discharge Type
Direction: Right or left
Track Type
Pad: Single or double grouser
Conveyor Type
Belt Style: Cleat or finger type | Style: Curved
Oil Type
Vermeer HyPower 68 or Vermeer HyPower 100
Features
Track Size: D7G | Control System: TEC Plus with SmartTEC