2025 Vermeer® Pipeline Directional Drills D1320x900
- Year 2025
- Make Vermeer®
- Model Pipeline Directional Drills
2025 Vermeer® Pipeline Directional Drills D1320x900
2025 Vermeer® Pipeline Directional Drills D1320x900
Operates efficiently with high-torque, low-speed Hagglunds® hydraulic motors powering the rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.
Reduces stress on the motor, because the thrust box bearing-pack assembly is designed to absorb the axial load caused by thrust and pullback.
Helps prevent rod wrap or windup because its floating vise allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
Features may include:
- Features to improve performance, reliability and durability.
- Equipped with twin CAT® C-25 engines.
Engine
Engine Manufacturer
(1) CAT C-27
Engine Power
Gross: 800 hp
Engine Torque
Maximum: 2000 rpm
Fuel Usage
Fuel Type
Diesel
Suspension
Suspension
Triple axle with air ride suspension
Operational
Operating Conditions
Thrust: 1360000 lbs | Pullback: 1360000 lbs | Maximum Spindle Torque: 102500 ft-lb | Maximum Spindle Torque (Low at Maximum Engine RPM): 102500 ft-lb
Operating Speed
Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm | Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600): 54 rpm | Maximum Carriage Speed at Maximum Engine RPM: 64 ft/min
Dimensions
Transport Length
Minimum: 50.5 ft
Transport Height
Minimum: 11.5 ft
Width
8.5 ft | Front Base Anchor: 6 ft | Front Flat Anchor:5 ft | Rear Base Anchor: 7.8 ft | Cabin: 8.5 ft | Power Pack: 8 ft
Length
Front Base Anchor: 20 ft | Front Flat Anchor: 9.5 ft | Rear Base Anchor: 16 ft | Cabin: 10 ft | Power Pack: 22.4 ft
Height
Front Base Anchor:24 in | Front Flat Anchor: 8 in | Rear Base Anchor: 8 in | Cabin: 9 ft | Power Pack: 10.3 ft
Dimensions
Number of Rear Legs: 2 | Drill Rack Angle: 8 degrees to 12 degrees | Number of Rotation Motors: 1 | Number of Drive Motors: 6 | Mud Swivel: 3 in | Lower Breakout Force: 253000 ft-lb | Lower Configuration: 3-jaw clamp, 8 " (20.3 cm) | Lower Travel: 6 ft | Lower Inside Diameter: 9.8 in | Upper Clamp Force: 250000 ft-lb | Upper Configuration: 2-jaw clamp | Upper Inside Diameter: 10 in
Capacities
Fuel Capacity
Tank: 500 gal
Hydraulic Capacity
Tank: 720 gal
Weights
Weight
101000 lbs | Cabin: 6000 lbs | Power Pack: 38000 lbs
Features
Features
Heat and Air Conditioning: In-wall combination unit | EPA Certification Family: Tier 2 (EU Stage II) | Remote Lockout| Strike Alert