2025 Vermeer® Pipeline Directional Drills D1000x900
- Year 2025
 - Make Vermeer®
 - Model Pipeline Directional Drills
 
2025 Vermeer® Pipeline Directional Drills D1000x900
High-torque, low-speed Hagglunds® hydraulic motors efficiently powers rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.
Muscles through difficult ground formations with higher torque than other predecessors.
Thrust box bearing-pack assembly reduces stress on the motor by absorbing the axial load caused by thrust and pullback.
Floating vise helps prevent rod wrap or windup because it allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
Features may include:
- Muscle for the biggest of drilling jobs
 
- Run full torque and full rotary rpm simultaneously
 
- Rugged design for real-world rigors
 
Engine
							Engine Manufacturer
							(1) CAT C-27
						
						
							Engine Power
							Gross: 800 hp
						
						
							Engine Torque
							Maximum: 2000 rpm
						
						Fuel Usage
							Fuel Type
							Diesel
						
						Suspension
							Suspension
							Triple axle with air ride suspension
						
						Operational
							Operating Conditions
							Thrust: 1000000 lbs | Pullback: 1000000 lbs | Maximum Spindle Torque: 102500 ft-lb
						
						
							Operating Speed
							Maximum Spindle Torque (Low at Maximum Engine RPM): 102500 ft-lb | Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm |Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600): 54 rpm |Maximum Carriage Speed at Maximum Engine RPM: 77 ft/min
						
						Dimensions
							Transport Length
							Minimum: 	50.5 ft
						
						
							Transport Height
							Minimum: 	11.5 ft
						
						
							Width
							8.5 ft | Front Base Anchor: 6 ft | Front Flat AnchoR: 5 ft | Rear Base Anchor : 7.8 ft | Cabin: 8.5 ft | Power Pack: 8 ft
						
						
							Length
							Front Base Anchor: 20 ft | Front Flat Anchor: 9.5 ft | Rear Base Anchor: 16 ft | Cabin: 10 ft | Power Pack: 22.4 ft
						
						
							Height
							Front Base Anchor: 24 in | Front Flat Anchor: 8 in | Rear Base Anchor: 8 in | Cabin: 9 ft | Power Pack: 10.3 ft
						
						
							Dimensions
							Number of Rear Legs: 2 | Drill Rack Angle: 8 degrees to 12 degrees | Number of Rotation Motors: 1 | Number of Drive Motors: 4 | Mud Swivel: 3 in | Lower Travel: 6 ft | Lower Inside Diameter: 9.8 in | Lower  Breakout Force: 253000 ft-lb | Lower Configuration: 3-jaw clamp, 8 " (20.3 cm) | Upper Breakout Force: 250000 ft-lb | Upper Configuration: 2-jaw clamp | Upper Inside Diameter: 10 in
						
						Capacities
							Fuel Capacity
							Tank: 500 gal
						
						
							Hydraulic Capacity
							Tank: 720 gal
						
						Weights
							Weight
							101000 lbs | Cabin: 6000 lbs | Power Pack: 38000 lbs | Breakout Vise: 3800 lbs
						
						Features
							Features
							Heat and Air Conditioning: In-wall combination unit | Remote Lockout: Yes | Strike Alert: Yes | EPA Certification Family: Tier 2 (EU Stage II)