2024 Vermeer® HG6000E Hydraulic

Information

2024 Vermeer® HG6000E Hydraulic

As your stationary operation looks to electric-power, Vermeer is your partner for the equipment expertise you need. The HG6000E horizontal grinder is powered by two electric motors providing a combined 700 hp (522 kW) to the mill.

Features may include:

Two electric motors

The HG6000E is powered by two electric motors that deliver a combined 600 hp (447 kW) to the mill. A separate 60-hp (44.7-kW) electric motor powers the pump for the hydraulic circuits, while a 2-hp (1.5-kW) electric motor is used to cool the hydraulic system.

Motor starter panel

The motor starter panel provides options to configure a control system that best fits your application - whether that’s a soft-start or VFD panel.

Series II duplex drum system

Improve cutting performance using the patented Series II duplex drum system designed with reversible hammers and tips to help reduce daily maintenance and nearly double wear life.

Dedicated chip drum

For enhanced flexibility with the HG6000E, a dedicated chip drum – adjustable for product size ranging from .125 in to 1.5 in (3.2 mm to 38.1 mm) - is available.

Open-ended, wide infeed tables

Maximize loading speed and productivity using the patented SmartGrind system and hydraulic feed roller down pressure. Open-ended, wide infeed tables are designed to make over-the-side loading easy and efficient.

Thrown object deflector (TOD)

Reduce the quantity and distance of thrown material debris with the TOD, strategically placed to reduce interference when loading over-length material.

Photos

Highlights

  • Jasper, Georgia
  • 2024
  • Vermeer®
  • HG6000E Hydraulic
  • Available
  • 158 in | Feed Table: 60 in | Infeed Roller: 56.8 in | Millbox Opening: 60" (152.4 cm) | | Liner Dimensions: 5.6" (14.2 cm) | 48 in
  • 87.4 in | Loading: 7.6 ft | Maximum Feed: 32 in | Millbox Opening: 32" (81.3 cm) | Load: 14.5 ft

Specifications

  • 2024
  • Vermeer®
  • HG6000E
  • Hydraulic
  • Horizontal
  • WEG W22
  • 60 hp
  • Full Load: 175 ft-lb
  • Type: Radial piston motor | Motor: Fixed displacement, Geroler | Planetary: Two options (HD - 26.18:1) (STD - 34.2:1) | Motor: Fixed displacement, Geroler | Motor Bearings: 1-15/16, 4-bolt flange
  • Air-ride
  • Option One: 255/70R22.5 Duals
  • 22.5"x 8.3" (57.2 cm x 21 cm) Hub piloted steel
  • Air-actuated with spring-applied parking brake
  • AA (qty 6)
  • 460 V | Frequency: 60 | Phase: 3 | System Voltage: 24V Machine Control Circuit | System Protection: Fused
  • Rated: 1775 rpm | Drum: 1.5 rpm | Tip: 1080 rpm | Belt: 780 ft/min
  • Screen Area: 3317 sq in
  • Open-loop, pressure- and flow-compensated | System: Open-loop
  • Variable displacement, axial piston | Fixed displacement, gear pump
  • Pump at Maximum RPM: 28.5/27.3 (60Hz/50Hz) | Pump at Maximum RPM: 23 gpm
  • System Relief: 4500 | System Relief: 3000
  • 364/5TS
  • Fifth wheel
  • 12-24 V LED
  • Full Load Amps: 68.3 | Locked Rotor Amps: 451 | Service Factor: 1.25 | Locked Rotor (%): 240 | Break Down: 260 | Nominal Efficiency: 95 | Power Factor: .87 | Infeed Roller Diameter: 36.1 in | Deflector Position: Variable | Drum Diameter: 5600 in | Tip Diameter: 28 in | Drum Skin Thickness: 62.4 in | Bearing - Inner Race Diameter: 5.5 in | Center Retention Pin Dimensions: 2" diameter (5.1 cm) | Screen Dimensions: 3/4" (1.9 cm) thick | Liner Dimensions: 1" thick (2.5 cm) | Anvil Dimensions: 22.8"x 4.1"x 80.8" (57.9 cm x 10.4 cm x 205.2 cm) | Idler Roller Diameter: 12 in | Idler Roller Bearing: 1-15/16, 4-bolt flange | Standard Drive Roller Diameter: 12.8 in | Magnetic Drive Roller Diameter: 12.8 in | Operating Range: Up to 300' (91.4 m)
  • Maximum - Transport with Dolly: 45.8 ft
  • Maximum (Operation): 54.5 ft | Feed Table - Option One: 20 ft | Center Retention Pin Dimensions: 75.3" (191.3 cm) | Liner Dimensions: 65.4" (166.1 cm) | 81.3 ft
  • Maximum Transport - with Dolly: 9.8 ft
  • 87.4 in | Loading: 7.6 ft | Maximum Feed: 32 in | Millbox Opening: 32" (81.3 cm) | Load: 14.5 ft
  • 158 in | Feed Table: 60 in | Infeed Roller: 56.8 in | Millbox Opening: 60" (152.4 cm) | | Liner Dimensions: 5.6" (14.2 cm) | 48 in
  • 24.1 in
  • Drum: 36.4 in
  • Option One: 5.3 in
  • Tank: 65 gal
  • Enclosure: TEFC | Duty Cycle: S1 | NEMA Design: B | Insulation Class: F | Ambient Temperature: 40 c | Added Items: Nema C Face Mount, Terminal Block | Tooth Design: Serrated bars | Number of Teeth: 13 bars | Number of Hammers: 10 | Number of Tips: 20 | Number of Screens: 2 | Number of Sides: 1 | Anvil Type: Fabricated steel with replaceable wear surfaces | Return Roller Quantity: 3 | Filtration Method: Dual in-tank return filters with suction strainer | Number of Coolers: 1 | Display Type: LCD | Switches: Moisture-proof, toggle style/Sealed membrane | Channel Setting: 50 channels | Number of Axles: 3
  • 56000 lbs | Tongue - Engine Option 1 with olly: 21600 lbs | Axle Weight - Engine Option 1 with Dolly: 43400 lbs | Dolly: 9500 lbs | 55500 lbs | Rear Pad: 31600 lbs | Front Pad: 23900 lbs | Approximate: 869 lbs | 4100 lbs | Infeed Roller: 1300 lbs | Screen: 470 lbs
  • Flare: Integrated with infeed | Steel | Drive Roller: Welded steel | Front Idler Roller: Self-cleaning steel auger | Infeed Floor: Welded steel with replaceable UHMW wear plates | Type: Fabricated steel | Screen Type: Fabricated out of abrasion resistant steel | Millbox Lid Liner Dimensions: Abrasion resistant steel | Splice: R2-stainless steel or Super splice
  • Feed: Welded slat chain
  • Double row, spherical roller
  • Design: 3 ply - 330# or straight warp single ply 330# both with V cleat
  • Recommended: Vermeer HyPower 68