2024 Vermeer® TG9000 Base

Information

2024 Vermeer® TG9000

When you need maximum power for your high-production grinding operation, the TG9000 is an ideal choice. The TG9000 features a large-diameter opening of 11 ft (3.4 m) inside the tub. The patented Series III duplex drum offers proven cutting performance and reversible hammers and tips that maximize the wear life of single-sided designs and make daily maintenance efficient.

Features may include:

Engine power

A CAT C32 Tier 4 Stage V engine provides 1,125 hp (838 kW) of power to meet your jobsite demands.

Optimal cutting performance

The patented Series III duplex drum offers proven cutting performance, and reversible hammers and tips nearly double the wear life of single-sided designs, simplifying daily maintenance.

Jobsite safety

The thrown object restraint system (TORS) reduces the amount and distance of thrown material debris and has a smooth underside of optimal material flow.

Precise placement

The radial stacking rear discharge conveyor oscillates 60 degrees, allowing the operator to place the processed material where they need it without moving the machine.

Convenient control

Make machine adjustments or monitor real-time performance and data via the machine control panel or the handheld transceiver remote.

High production

Smooth, 63-in (160-cm) belt enables high-volume product removal and is constructed of 0.5-in (1.3-cm) thick rubber to help resist tearing and puncturing.

Photos

Highlights

  • Jasper, Georgia
  • 2024
  • Vermeer®
  • TG9000 Base
  • C32
  • Ultra-low sulfur diesel
  • Available
  • Belt width Discharge - 48 in (121.9 cm), belly - 60 in (152.4 cm)
  • Loading: 11.3 ft | Load: 13-18 ft (4-5.5 m)

Specifications

  • 2024
  • Vermeer®
  • TG9000
  • Base
  • Horizontal
  • C32
  • CAT
  • Tier 4 Final/Stage V
  • 12
  • 1125 hp
  • 4056 ft-lb
  • Three stages - pre-cleaner, primary element and secondary element
  • Spin-on (2)
  • Medium: Liquid
  • Max Consumption: 55.2 gph
  • Ultra-low sulfur diesel
  • Hydraulic-operated wet clutch | Engagement: Switch or button
  • Closed loop hydraulic, continuous sprocket | Chain: ANSI #160 roller chain | Tensioner: Compression spring | Motor: Hydraulic, low speed/high torque (qty 2) | Motor: Geroler
  • Custom | U - Joints: 10C, greaseable
  • Air actuated with spring-applied park brake
  • 255/70R22.5 duals
  • 22.5-in x 8.25-in (57.2-cm x 21.1-cm) hub-piloted steel
  • Group 8-D, 1400 CCA (qty 2) | radio: AA (qty 6)
  • 24 V
  • System Protection: Fused
  • Drum: 1269 rpm | Tip: 12105 ft/min | Belt: Discharge - 0-1060 fpm (0-323 m/min); belly - 0-744 fpm (0-227 m/min) | Fan Series - FWD/REV: 1180 rpm/500 rpm
  • Screen Area: 5100 sq in
  • Sound power LwA = 118.4 dB(A), at the control panel = 86.4 dB(A)
  • System / clutch: Open loop / tub / fan: Closed loop
  • Gear / tub: Axial piston, variable displacement
  • Pump at Maximum RPM: 44.5 gpm / fan: 43.4 gpm / clutch: 10.1 gpm
  • System relief: 3000 psi / tub: 4000 psi / fan: 5000 psi / clutch: 250 psi
  • Bolt-in kingpin - 2 in (5.1 cm)
  • Thrown Object Restraint System: Pivoting tub cover assembly | Tub Cover Positions: Transport and operate with hydraulic lock
  • Trailer Type: 12V incandescent
  • Air to Boil Temperature: 127 deg | Tub Table Thickness: 0.5 in (1.3 cm) | Table Tilt Degrees: 93 deg | Millbox Opening: 32 in x 70 in (81.3 cm x 177.8 cm) | Inside Diameter of Tub: 11 ft | Inside Flare Diameter - At Base of Tub: 11.4 ft | Inside Flare Diameter - At Tub Opening: 13 ft | Wall Thickness: .4 in | Wear Liner Thickness: .8 in | Drum Diameter: 28 in | Tip Diameter: 36.4 in | Drum Skin Thickness: 1.5 in | Bearing - Inner Race Diameter: 5.5 in | Center Retention Pin Dimensions: 2 in (5.1 cm) | Screen Dimensions: 72 in x 38 in x 1.0 in (182.9 cm x 96.5 cm Ø x 2.5 cm) | Breaker Bar Dimensions: 2.5 in x 4 in x 77 in (6.4 cm x 10.2 cm x 195.6 cm) | Distance - Screen to Millbox Wall: 19 in | Idler roller diameter: Discharge and belly - 10 in (25.4 cm) | Idler Roller Bearing: Discharge and belly - 2.93 in (4.9 cm), 4-bolt flange | Drive Roller Diameter: 14 in | Magnetic Drive Roller Diameter: 14 in | Swing arc: +/- 30 degrees, 60 degrees total | radio Operating Range: 300 ft (91.4 m)
  • Maximum: 46 ft
  • Maximum - Conveyor Unfolded: 72 ft | Discharge - 30 ft (9.1 m)
  • Maximum: 11.9 ft
  • Maximum: 165 in
  • of Tub: 4.6 ft
  • Loading: 11.3 ft | Load: 13-18 ft (4-5.5 m)
  • Drum: 64 in
  • Belt width Discharge - 48 in (121.9 cm), belly - 60 in (152.4 cm)
  • 9 in
  • 60" (152.4 cm) Dia
  • Tank: 600 gal
  • Volume with Filter: 72 qt
  • Fan: diameter, fixed pitch, hydraulic reverse, variable speed | Wall Type: Grade 50 plate | Tub Roller Quantity: Eight carrier, eight guide (qty 16) | Tub Agitators: 4 | Falling Object Protection at Control Station: Overhead and side protection | Number of Hammers: 10 | Number of Cutters: 20 | Cutter Block Types: Multiple styles, 2-bolt retention with 7/8-in (2.2-cm) UNC fasteners | Number of Wipers: 4 | Number of Sides: Four usable edges | Return Roller Quantity: 5 standard and 1 vibrating roller | Filtration Method: In-tank return filters (qty 2) | Number of Coolers: 1 | clutch Filtration Method: Spin-on pressure | clutch Number of Coolers: 1 | control Display Type: LCD multi-function | control Gauges: Tub pressure, conveyor pressure, auxiliary hydraulic pressure, clutch pressure | control Switches: Moisture proof, toggle style | radio Display Type: LCD multi-function | radio Switches: Sealed membrane | radio Channel Setting: 50 channels
  • Tank: 100 ga
  • Engine Option One: 106000 lbs | King pin - Engine option one: 35000 lbs | Axle: 71000 lbs | Screen: 500-800 lb (226-362 kg)
  • Recommended: CAT DEO-ULS, API CJ-4, API CK-4 or ECF-3 10W-30/15W-40 | Recommended: Hy-power 68 | Recommended: VMF ultra gold
  • Tub Table Type: T1 steel | Wear Liner Type: Abrasion-resistant plate (AR400), hardfaced | Screen Type: AR400, reversible (qty 2) | Breaker Bar Type: T1 steel, repleaceable | Splice: Discharge and belly - Flexco R2 stainless steel
  • Double row, spherical roller
  • Design: Discharge - 220# V-cleat, belly - 330# smooth
  • Quad-axle leaf spring