2024 Vermeer® Trommel Screens TR6450

Information

2024 Vermeer® Trommel Screens TR6450

Introducing the all-new TR6450 trommel screen from Vermeer. Keep your business moving with a three-cut, single drum mobile unit, fully customizable to fit your needs. Providing a one-pass solution to produce multiple fractions, quick screen changeability and multiple conveyor configurations to conquer your opportunities.

Features may include:

Tensioned screen drum

Tensioning the screens allows for maximum strength with a finer wire gauge, optimizing production through improved open area. In high moisture applications, the use of stainless steel screens can be very useful.

Jobsite flexibility

The auxiliary hydraulic system grants the TR6450 trommel screen the ability to run the third fraction conveyor or other attachments.

Full-function remote

The ability to adjust the working trommel from the loader is made possible by the standard full-function remote control. The remote allows you to adjust screening functions, raise and lower conveyors, pause the hopper, reverse the engine fan and more.

Drum drive

The hydraulic-driven chain drive system provides positive drum drive and also allows the drum to lift off of the cog for service and maintenance. The drum drive is monitored so the hopper belt will stop when the drum is reaching capacity, in order to prevent over feeding.

Low hopper height

With a hopper height of 9.5 ft (2.9 m), the operator can load material without having to build a ramp to the machine, decreasing loading cycle times.

Photos

Highlights

  • Jasper, Georgia
  • 2024
  • Vermeer®
  • Trommel Screens TR6450
  • Model: 3.6L
  • Available
  • Operation: 43.3 ft | Apron Opening: 37.5 in | Conveyor Belt: 30 in | Self-Cleaning Tail Pulley Dimensions: 38-in (96.5-cm) wide
  • Operation: 16.7 ft | Apron Opening: 45 in | Hopper: 9.5 ft (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg)

Specifications

  • 2024
  • Vermeer®
  • Trommel Screens
  • TR6450
  • General
  • Model: 3.6L
  • CAT
  • Tier 4F (Stage V)
  • 4
  • Rating: 120 hp (90 kW)
  • Spin-on
  • Dual element
  • Drum: 35.5 in³ (630 cm³) displacement | Conveyor: 16.7 cu-in / fines: 14.2 cu-in
  • Fuel Consumption: 3 gph (11.4 L/hr)
  • Leaf spring
  • 445/50 R22.5
  • 950 CCA
  • System Voltage: 12-V, 120-amp alternator
  • Apron Conveyor: 0-15 ft/min | Drum: 0-25 rpm | Collecting Belt: 360 ft/min | Fines Belt: 400 ft/min
  • Drum Operation: 0-35.9 gpm (0-135.9 L/min)
  • Four independent hydraulic jacklegs | Collecting conveyor frame: Part of trailer frame | Fines Conveyor Frame: Engineered structural frame
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 35 deg | Hopper Opening: 11.7 ft x 5.3 ft (3.6 m x 1.6 m) | Apron Conveyor Rollers: 5 in (12.7 cm) | Drum Diameter: 6.5 ft | Thrust Bearing Diameter: 4 in | Thrust Bearing Face: 2 in | Drum Angle Adjustability: 0-5 deg | Brush Diameter: 14 in | Brush Assembly Support: (2) 1.25 in (3.2 cm) sealed ball bearings/brush | Head/Tail Pulley Type: 8-in (20.3-cm) crowned | Head Pulley Bearing: 1.75-in (4.4-cm) double roller / 1.5-in (3.8-cm) pillow block | Tail Pulley Takeup: 6 in | Self-Cleaning Return Idlers: (3) 4-in (10.2-cm) rubber disc | Head Pulley Type: 8-in (20.3-cm) crowned | Self-Cleaning Tail Pulley Dimensions: 8-in (20.3-cm) diameter, crowned wing pulley, 1.75-in (4.4-cm) shaft | Head Pulley Takeup: 8 in | Self-Cleaning Return Idlers: (3) 4-in (10.2-cm) diameter | Conveyor Belt Type: 220 lb (99.8 kg), 2-ply, 2/16-in x 1/16-in (3.2-mm x 1.6-mm)
  • 39.5 ft
  • 119.5 in
  • 13.2 ft
  • Operation: 54.2 ft | Apron Conveyor: 12.4 ft | Drum: 20 ft | Collecting Conveyor: 16 ft | Fines Conveyor: 23.5 ft
  • Operation: 43.3 ft | Apron Opening: 37.5 in | Conveyor Belt: 30 in | Self-Cleaning Tail Pulley Dimensions: 38-in (96.5-cm) wide
  • Operation: 16.7 ft | Apron Opening: 45 in | Hopper: 9.5 ft (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg)
  • Bottom: 37.5 in
  • Apron Conveyor Belt: 42 in | Belt: 36 in
  • 180 yd³ (137.6 m³) per hour with 0.5-in (1.3-cm) screens installed and material with moisture less than 40%
  • Tsnk: 50 gal
  • Volume with Filter: 11.2 qt
  • Tank: 80 gal
  • 6.5 cu yd
  • 39000 lbs | Hitch: 5300 lbs
  • Radiator Fan: Suction | Apron Conveyor Rollers: CEMA "D" x 17 | Drum Drive Chain: 140 extended pin/extended width | Maximum Screen Panels: 8 | Rubber Flashing: Adjustable corded rubber | Idler Type: 4 in (10.2 cm) CEMA "B" straight | Troughing Idler Type: 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in (101.6-cm) centers
  • Recommended: Mobil 15W40
  • Drum Support Description: 8 polyurethane trunnion wheels on pivoting bogeys 8 in x 4 in (20.3 cm x 10.2 cm) wide | Bristle: Polyethylene