Current Vermeer® Recycling Trommel Screens

2025 Vermeer® Trommel Screens TR6400

2025 Vermeer® Trommel Screens TR6400

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Trommel Screens
  • Engine Model: 3.6L
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2025 Vermeer® Trommel Screens TR6400

2025 Vermeer® Trommel Screens TR6400

  • Year 2025
  • Manufacturer Vermeer®
  • Model Name Trommel Screens
  • Trim Name TR6400
  • Generic Type (Primary) General
  • Cylinder Liners 4
  • Engine Manufacturer Deutz
  • Oil Filter Spin-on
  • Engine Model: 3.6L
  • Air Cleaner Dual element
  • Emissions Tier 4F (Stage IV)
  • Engine Power Rating: 100 hp (74.5 kW)

2025 Vermeer® Trommel Screens TR6400

Compatibility with smaller gauge wire increases the open screen area helping overall production of the machine, particularly in applications when processing wetter materials.

Screen changes can help improve jobsite efficiency, a particularly important feature when processing a range of materials that require frequent screen changes.

A low hopper infeed height helps to decrease loading cycle times and eliminates the need for loading ramps with most loaders.

A single large access door provides engine service access.

Lift bars lift and agitate material for thorough screening.

Operators can control the machine through either the Vermeer DP10 display mounted on the control panel.

Features may include:

  • Tough and compact design
  • Quick change tensioned screens
  • Complete control for maximized productivity

Engine

Cylinder Liners 4
Engine Manufacturer Deutz
Oil Filter Spin-on
Engine Model: 3.6L
Air Cleaner Dual element
Emissions Tier 4F (Stage IV)
Engine Power Rating: 100 hp (74.5 kW)

Motor

Displacement Drum: 35.5 cu in (581.7 cu cm) displacement | Conveyor: 14.2 cu-in

Fuel System

Fuel System Fuel Consumption: 3 gph (11.4 L/h)

Suspension

Suspension Leaf spring

Wheels & Tires

Tires, Rear Specification 445/50 R22.5

Battery

Battery 950 CCA

Electric

Electrical System Voltage: 12 V, 120 amp alternator

Operational

Operating Speed Apron Conveyor: 0-15 fpm | Drum: 0-25 rpm | Collecting Belt: 360 ft/min | Fines Belt: 400 ft/min

Hydraulics

Hydraulic Pump 77.8 gpm @ 3000 psi (294.5 L/min @ 206.8 bar) | Drum Operation: 0-33.1 gpm (0-125.3 L/min)

Chassis

Frame Type Four independent hydraulic jacklegs | Fines Conveyor Frame: Part of trailer frame / Engineered structural frame

Dimensions

Transport Length 40 ft
Transport Width 99 in
Transport Height 13.1 ft
Conveyer Width Belt: 36 in
Hopper Width Bottom: 37.5 in
Length Operation: 54 ft | Apron Conveyor: 12.4 ft | Drum: 20 ft | Collecting Conveyor: 16 ft | Fines Conveyor: 23.5 ft
Width Operation: 295 in | Apron Opening: 37.5 in | Apron Conveyor Belt: 42 in
Height Operation: 16.7 ft | Apron Opening: 45 in | Hopper: 9.5 ft (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg)
Dimensions Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 11.7 ft x 5.3 ft (3.57 m x 1.6 m) | Drum Diameter: 6.5 ft | Thrust Bearing Diameter: 4 in | Thrust Bearing Face: 2 in | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25 in (3.2 cm) sealed ball bearings/brush | Head/Tail Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.75 in (4.4 cm) double roller | Tail Pulley Takeup: 6 in | Self-Cleaning Return Idlers: 4 in (10.2 cm) rubber disk x 3 | Head Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.5 in (3.8 cm) pillow block | Self-Cleaning Tail Pulley Dimensions: 8 in diameter, 38 in wide, crowned wing pully | Head Pulley Takeup: 8 in | Drum Angle Adjustability: 0-5 deg | Conveyor Belt Type: 220 lb (99.8 kg), 2 ply, 2/6" x 1/16" (4.8 mm x 1.6 mm)

Capacities

Fuel Capacity Tank: 50 gal
Hydraulic Capacity Tank: 80 gal | 6.5 cu yd
Oil capacity Oil Volume with Filter: 10 qt
Volume Approximately 180 cu yd (137.6 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%

Weights

Weight 37000 lbs | Hitch: 4200 lbs

Features

Construction Material Bristle: Polyethylene
Features Radiator Fan: Suction | Apron Conveyor Rollers: 5 CEMA "D" x 17 in (12.7 x 43.2 cm) | Drum Support Description: 8 polyurethane trunnion wheels on pivoting bogeys 8 od x 4 in wide (20.3 x 10.2 cm) | Drum Drive Chain: 140 extended pin/extended width | Maximum Screen Panels: 8 | Rubber Flashing: Adjustable corded rubber | Idler Type: 4 in (10.2 cm) CEMA "B" straight | Troughing Idler Type: 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in centers | Axle: Leaf spring
Oil Type Recommended: Mobil 15W40

Product Photography