2025 Vermeer® Trommel Screens TR626EM

Information

2025 Vermeer® Trommel Screens TR626EM

Forget the loading ramps with the help of the low hopper infeed height of the TR626 trommel screen.

Move material smoothly without bridging, thanks to a tall, wide throat opening.

Startup delay and alarm systems notify your whole crew when the machine is about to start.

Tensioning the screens allows for maximum strength with a finer wire gauge, optimizing production through increased open area. In high moisture applications, the use of stainless-steel screens can be very useful.

The fines conveyor can have straight discharge or ordered with 180-degree radial arc. Both offer adjustable stacking height to reduce material loss and reduced dust in windy condition.

The machine is powered by two industrial-duty, fully-enclosed and fan-cooled electric motors, a single 150-hp (112-kW) motor powering the hydraulic pump stack and a .75-hp(.6-kW) motor powering the cooling fan for the hydraulic system.

Can be ordered with a 20-ft or 28-ft (6.1 m or 8.5 m) length, with standard or magnetic head pulley and are fully height adjustable to reduce dust and material loss in windy conditions.

Features may include:

  • Machine built to minimize jobsite disturbance
  • Complete control allows for increased efficiency when it matters most
  • Spend less time on maintenance and more time being productive

Photos

Highlights

  • Jasper, Georgia
  • 2025
  • Vermeer®
  • Trommel Screens TR626EM
  • Available
  • Operation: 113 in | Apron Opening: 43 in | Drum Support Description: 4 in (10.2 cm) | Head/Tail Pulley Type: 38 in (99.65 cm) | Head Pulley Type: 38 in (99.65 cm) | Self-Cleaning Tail Pulley: 38 in (96.5 cm)
  • Operation: 15.9 ft | Apron Opening: 34 in | Hopper: 9.5 ft (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 16.6 ft (5.1 m) with drum at 4 deg

Specifications

  • 2025
  • Vermeer®
  • Trommel Screens
  • TR626EM
  • General
  • Siemens
  • 150 hp, 1800 rpm, 460 V, 3 phase
  • Drum: 48.8 cu in (800 cu cm) displacement | Conveyor: 38.4 cu-in
  • Leaf spring
  • 235-75R 17.5H qty. 4
  • System Voltage: 460 V
  • Apron Conveyor: 0-35 fpm (0-10.7 m/min) | Drum: 0-24 rpm | Fines Belt: 405 ft/min | Fines Belt: 405 ft/min
  • 62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa]) | Drum Operation: 0-42.6 gpm (161.3 L/min)
  • 4 independent hydraulic jacklegs | Fines Conveyor Frame: Part of trailer frame | Fines Conveyor Frame: 4 in x 8 in (10.2 cm x 20.3 cm) structural steel tubing
  • Hopper Opening: 13.2 ft x 5.3 ft (4 m x 1.6 m) | Apron Conveyor Rollers: 4 in (10.2 cm) diameter qty. 14 | Drum Diameter: 6 ft | Drum Support Description: 8 in (20.3 cm) diameter | Thrust Bearing Diameter: 5 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 0-7 degrees | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25-in (3.2-cm) sealed ball bearings | Head/Tail Pulley Type: Rubber-lagged, 12 in (30.5 cm ) diameter | Head Pulley Bearing: 2.4 in (6.1 cm) pillow block | Rubber Flashing: Adjustable, 0.25 in (6.44 cm) thick, 4 in (10.2 cm) | Tail Pulley Takeup: 12 in | Self-Cleaning Return Idlers: 6, each 4 in (10.2 cm) diameter | Head Pulley Type: Rubber lagged, 12 in (30.5 cm) diameter | Rubber Flashing: Adjustable, 0.25 in (0.64 cm) thick, 4 in (10.16 cm) | Self-Cleaning Tail Pulley: 10 in (25.4 cm) diameter, 2.4 in (6.1 cm) shaft | Tail Pulley Takeup: 12 in | Self-Cleaning Return Idlers: 11, each 4 in (10.2 cm) diameter | Conveyor Belt Type: 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm)
  • 54.5 ft
  • 113 in
  • 13.5 ft
  • Bottom: 48 in
  • Apron Conveyor Belt: 48 in | 36 in
  • Operation: 84.4 ft | Apron Conveyor: 16 ft | Drum: 26 ft | Fines Conveyor: 72.5 ft
  • Operation: 113 in | Apron Opening: 43 in | Drum Support Description: 4 in (10.2 cm) | Head/Tail Pulley Type: 38 in (99.65 cm) | Head Pulley Type: 38 in (99.65 cm) | Self-Cleaning Tail Pulley: 38 in (96.5 cm)
  • Operation: 15.9 ft | Apron Opening: 34 in | Hopper: 9.5 ft (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 16.6 ft (5.1 m) with drum at 4 deg
  • 6 cu yd
  • Tank: 200 gal
  • Drum Support Description: Four steel trunnion rollers | Drum Drive Chain: 140 WT | Maximum Screen Panels: 8 | Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (20.96 cm) centers | Troughing Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (60.96 cm) centers
  • Approximately 200 cu yd (152.9 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%
  • 65000 lbs | Hitch: 30000 lbs
  • Bristle: Polyethylene