2024 Vermeer® Trommel Screens TR626 Tier 3
- Year 2024
- Make Vermeer®
- Model Trommel Screens
- Engine Model: 4045H
2024 Vermeer® Trommel Screens TR626 Tier 3
2024 Vermeer® Trommel Screens TR626 Tier 3
With a 6 ft/1.83 m drum and a hopper that holds 6 cubic yards/4.6 cubic meters, the TR626 makes short work of processing material. Access the drum through removable side panels, drum end or top of the drum. Its 125 hp/93.2 kw John Deere 4045 Tier 4 Final is a powerful workhorse. Impressive 72.5 ft/22.1 m conveyor features self-cleaning tail pulley and return idlers.
Features may include:
Startup delay and alarm systemsEnhance worker safety with startup delay and alarm systems that notify your whole crew when the machine is about to start.
Tall, wide throat openingMove material smoothly without bridging, thanks to a tall, wide throat opening.
Heavy-duty rollersExtend belt life even under tough loading conditions with closely set, heavy-duty rollers supporting the apron conveyor.
Keep screen weights lowKeep screen weights low when processing wet materials by clamping on a smaller diameter tension screen wire and increasing screening area.
Reduced spillageSpeed up your clean up because the flashing and sheeting fit tightly against the drum and conveyors to reduce spillage.
Low hopper infeed heightForget the loading ramps, since the 626 has a low hopper infeed height.
Engine
Engine Manufacturer
John Deere
Engine
Model: 4045H
Emissions
Tier 3
Cylinder Liners
4
Engine Power
Rating: 125 hp (93.2 kW) @ 2400 rpm, 355 ft-lb (481.3 Nm) of torque @ 1500 rpm
Oil Filter
Spin-on
Air Cleaner
Dual element oversized
Motor
Displacement
Drum: 48.8 cu in (800 cu cm) displacement | Conveyor: 38.4 cu-in | Conveyor Motor Displacement: 21.4 cu-in
Fuel System
Fuel System
Fuel Consumption: 3.5 gph (13.3 L/hr) under most operating conditions
Suspension
Suspension
Leaf spring
Wheels & Tires
Tires, Rear Specification
235-75R 17.5H qty. 4
Battery
Battery
950 cold cranking amps
Electric
Electrical
System Voltage: 12 V, 120 amp alternator
Operational
Operating Speed
Apron Conveyor: 0-35 fpm (0-10.7 m/min) | Drum: 0-24 rpm | Fines Belt: 405 ft/min | Fines Belt: 405 ft/min | Fines Belt: 705 ft/min | Maximum Variable Overs Belt: 290 ft/min
Hydraulics
Hydraulic Pump
62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa]) | Drum Operation: 0-42.6 gpm (161.3 L/min)
Chassis
Frame Type
4 independent hydraulic jacklegs | Fines Conveyor Frame: Part of trailer frame
Dimensions
Dimensions
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 13.2' x 5.3' (4 m x 1.6 m) | Apron Conveyor Rollers: 4" (10.2 cm) diameter | Drum Diameter: 6 ft | Drum Support Description: Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width | Thrust Bearing Diameter: 5 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 0-7 degrees | Brush Diameter: 14 in | Head/Tail Pulley Type: Rubber-lagged, 12" (30.5 cm) diameter | Head Pulley Bearing: 2.5" (6.4 cm) pillow block | Rubber Flashing: Adjustable, .25" (6.44 cm) thick, 4" (10.2 cm) | Tail Pulley Takeup: 12 in | Self-Cleaning Return Idlers: 6, each 4" (10.2 cm) diameter | Head Pulley Type: Rubber lagged, 12" (30.5 cm) diameter | Self-Cleaning Tail Pulley Dimensions: 10" (25.4 cm) diameter, 2.4" (6.1 cm) shaft | Self-Cleaning Return Idlers: 11, each 4" (10.2 cm) diameter | Fines Conveyor Frame: 4" x 8" (10.2 cm x 20.3 cm) | Conveyor Belt Type: 150 lb (99.8 kg), 2 ply, 1/32" x 1/32" (.8 mm x 0.8 mm) | Fines Conveyor Frame: 2" x 8" (5.1 cm x 20.3 cm) structural steel building | Conveyor Belt Size: 48" (121.9 cm) wide with raised crescent | Conveyor Belt Type: 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) | Self-Cleaning Tail Pulley Dimensions: 10" (25.4 cm) diameter, 51" (129.5 cm) wide with 2.4" (6.1 cm) shaft | Tail Pulley Takeup: 12 in | Solid Return Idler Size: 4" x 8" diameter | Overs Conveyor Frame: 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
Transport Length
54.5 ft
Transport Width
113 in
Transport Height
13.5 ft
Length
Operation: 84.4 ft | Apron Conveyor: 16 ft | Drum: 26 ft | Fines Conveyor: 72.5 ft | Fines Conveyor: 30.5 ft | Overs Conveyor: 19 ft
Width
Operation: 113 in | Apron Opening: 43 in | Apron Conveyor Belt: 48 in | Head/Tail Pulley Type: 38" (996.5 cm) | Head Pulley Type: 38" (996.5 cm) | Self-Cleaning Tail Pulley Dimensions: 38" (96.5 cm)
Height
Operation: 15.9 ft | Apron Opening: 34 in | Hopper: 9.5' (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 16.6' (5.1 m) with drum at 4 degrees | Conveyor Belt Stacking: 3' (.9 m) x 10' (3.1 m)
Hopper Width
Bottom: 48 in
Conveyer Width
Belt: 36 in
Capacities
Fuel Capacity
Tank: 100 gal
Oil capacity
Oil Volume with Filter: 15.5 qt
Hydraulic Capacity
Tank: 200 gal
Volume
Approximately 200 cu yd (152.9 cu m) per hour with .5" (1.3 cm) screens installed and material with moisture less than 40%
Features
Chassis: 22500 lbs
Hopper Capacity
6 cu yd
Weights
Weight
65000 lbs | Hitch: 30000 lbs
Features
Features
Radiator Fan: Pusher type | Apron Conveyor Rollers: qty. 14 | Drum Drive Chain: 140 WT | Maximum Screen Panels: 8 | Brush Assembly Support: Two 1.25" (3.2 cm) sealed ball bearings | Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers | Troughing Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers | Head/Tail Pulley Type: Rubber lagged, crowned | Idler Type: 30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104 cm) centers
Construction Material
Bristle: Polyethylene | Fines Conveyor Frame: structural steel tubing | Conveyor Belt Type: vulcanized | Head Pulley Type: Rubber lagged | Overs Conveyor Frame: structural steel tubing