2025 Vermeer® Trommel Screens TR5300EM

Current Vermeer® Recycling Trommel Screens

Swipe to View More

Year 2025
Make Vermeer®
Model Trommel Screens

From either control, the operator can choose from four programmable presets or adjust machine settings based on incoming material.

Operators can control the machine through either the Vermeer DP10 display mounted on the control panel.

The TR5300EM features a large, low feed height hopper that makes it easier to load with a loading ramp, making the trommel screen more mobile around the jobsite.

The hydraulic-driven chain drive system provides positive drum drive and allows the drum to lift off of the cog for service and maintenance.

From the dual-hinged doors on either side of the machine, you can perform machine maintenance efficiently through ease of access to components such as motor, trommel drum and drum drive.

Without having to change out the drum, you can adjust the screen panel quickly which will allow operators to change opening size, wire gauge and type of wire so you can separate a wide variety of material.

Powered by an industrial-duty, fully enclosed and fan-cooled electric motor. A single 60-hp (44.5-kW) motor powers the hydraulic pump stack. Electric motors reduce exhaust emissions, jobsite noise and maintenance compared to diesel.

Features may include:

Electric-powered efficiency

Quiet operation for wherever the job may take you

Complete control for overall jobsite confidence

Motor

Motor Type Siemens

Displacement Conveyor: 33 cu-in

Motor Power Rating: 480 VAC, 3 Phase, 60 Hz, 60 hp (44.7 kW), 177 lb-ft (240 Nm) at 1800 rpm

Suspension

Suspension Single leaf sprung

Wheels & Tires

Tires, Rear Specification 445/50R22.5

Electric

Electrical System Voltage: 12 V | AC panel: 75 hp, 480 VAC, soft start

Operational

Operating Speed Drum: 0-24 rpm | Fines Belt: 500 ft/min

Hydraulics

Hydraulic Pump Drum Operation: 0-30.9 gpm (0-117 L/min) | Conveyor Operation: 17 gpm

Chassis

Frame Type Heavy-duty structural tubing | Fines Conveyor Frame: 2 in (5.1 cm) x 8 in (20.3 cm) structural steel tubing

Dimensions

Transport Length 39 ft

Transport Width 98.4 in

Transport Height 13.4 ft

Hopper Width Bottom: 37 in

Length Operation: 89.9 ft | Drum: 15 ft | Fines Conveyor: 55 ft

Height Operation: 15 ft | Hopper: 9.5 ft (2.9 m) | Conveyor Belt Stacking: 15 ft | Hopper Opening: 34-in

Dimensions Drum Diameter: 5 ft | Drum Support Description: 8-in (20.3-cm) diameter | Thrust Bearing Diameter: 4 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 0-7 deg | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25-in (2.3-cm) sealed ball bearings | Head Pulley: 12-in (30.5-cm) diameter | Head Pulley Bearing: 2 7/16-in (6.2-cm) pillow block | Self-Cleaning Tail Pulley Dimensions: 10-in (25.4-cm) diamater, 2 7/16-in (6.1-cm) shaft | Head Pulley Takeup: 10 in | Self-Cleaning Return Idlers: 4-in (10.2-cm) rubber disc

Capacities

Hopper Capacity 5.5 cu yd

Hydraulic Capacity Tank: 55 gal

Features Chassis: 20000 lbs

Volume 100 cu yd (76.5 m3) per hr with 0.5-in (12.7-mm) screens installed and material with moisture less than 40%

Weights

Weight 32000 lbs | Hitch: 11600 lbs

Features

Construction Material Bristle: Polyethylene

Features Drum Support Description: Eight poly trunnion rollers | Drum Drive Chain: 140 custom extended pin | Maximum Screen Panels: 4 | Head Pulley Type: Rubber-lagged | Troughing Idler Type: 20-deg CEMA "B" with permanently seated bearings | Self-Cleaning Return Idlers: qty 8

2025 Vermeer® Trommel Screens TR5300EM