2024 Vermeer® Trommel Screens TR5300EM

Current Vermeer® Recycling Trommel Screens

Swipe to View More

Year 2024
Make Vermeer®
Model Trommel Screens

The TR5300EM was designed to help accomplish the job wherever it may take you next. Powered by an industrial-duty, fully enclosed, and fan-cooled 60-hp (44.7-kW) Siemens electric motor, this machine was built to reduce exhaust emissions, jobsite noise and machine maintenance. Tension screen drum features are designed for optimum productivity offering simple and quick screen change, allowing you to separate a variety of material.

Features may include:

Tension screen design

The ability to adjust the screen quickly will allow operators to change opening size, wire gauge and type of wire so you can separate a wide variety of material.

Advanced controls

Operators can control the machine through a Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote.

Electric motor

The TR5300EM is powered by an industrial-duty, fully enclosed and fan-cooled electric motor. A single 60-hp (44.5-kW) motor powers the hydraulic pump stack. Electric motors reduce exhaust emissions, jobsite noise and maintenance compared to diesel.

Access to critical points

Access to critical points on the machine allows for efficient maintenance on components such as motor, trommel drum and drum drive.

Hydraulic-driven chain drive system

A hydraulic-driven chain drive system allows the drum to be lifted off the cog for service, and bolt-on sprockets can be changed quickly to help lower repair time.

Large, low-feed hopper

The TR5300EM features a large, low-feed hopper for ease of loading without a loading ramp, maximizing jobsite mobility.

Motor

Motor Type Siemens

Motor Power Rating: 480 VAC, 3 Phase, 60 Hz, 60 hp (44.7 kW), 177 lb-ft (240 Nm) at 1800 rpm

Displacement Conveyor: 33 cu-in

Suspension

Suspension Single leaf sprung

Wheels & Tires

Tires, Rear Specification 445/50R22.5

Electric

Electrical System Voltage: 12 V | AC panel: 75 hp, 480 VAC, soft start

Operational

Operating Speed Drum: 0-24 rpm | Fines Belt: 500 ft/min

Hydraulics

Hydraulic Pump Drum Operation: 0-30.9 gpm (0-117 L/min) | Conveyor Operation: 17 gpm

Chassis

Frame Type Heavy-duty structural tubing | Fines Conveyor Frame: 2 in (5.1 cm) x 8 in (20.3 cm) structural steel tubing

Dimensions

Dimensions Drum Diameter: 5 ft | Drum Support Description: 8-in (20.3-cm) diameter | Thrust Bearing Diameter: 4 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 0-7 deg | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25-in (2.3-cm) sealed ball bearings | Head Pulley: 12-in (30.5-cm) diameter | Head Pulley Bearing: 2 7/16-in (6.2-cm) pillow block | Self-Cleaning Tail Pulley Dimensions: 10-in (25.4-cm) diamater, 2 7/16-in (6.1-cm) shaft | Head Pulley Takeup: 10 in | Self-Cleaning Return Idlers: 4-in (10.2-cm) rubber disc

Transport Length 39 ft

Transport Width 98.4 in

Transport Height 13.4 ft

Length Operation: 89.9 ft | Drum: 15 ft | Fines Conveyor: 55 ft

Height Operation: 15 ft | Hopper: 9.5 ft (2.9 m) | Conveyor Belt Stacking: 15 ft | Hopper Opening: 34-in

Hopper Width Bottom: 37 in

Capacities

Volume 100 cu yd (76.5 m3) per hr with 0.5-in (12.7-mm) screens installed and material with moisture less than 40%

Hydraulic Capacity Tank: 55 gal

Features Chassis: 20000 lbs

Hopper Capacity 5.5 cu yd

Weights

Weight 32000 lbs | Hitch: 11600 lbs

Features

Features Drum Support Description: Eight poly trunnion rollers | Drum Drive Chain: 140 custom extended pin | Maximum Screen Panels: 4 | Head Pulley Type: Rubber-lagged | Troughing Idler Type: 20-deg CEMA "B" with permanently seated bearings | Self-Cleaning Return Idlers: qty 8

Construction Material Bristle: Polyethylene

2024 Vermeer® Trommel Screens TR5300EM