2024 Vermeer® Trommel Screens TR5300

Information

2024 Vermeer® Trommel Screens TR5300

The TR5300 trommel screen is ideal for operations where high productivity in a compact size is demanded. The tensioned screen and drum are designed for optimum productivity, offering simple adjustments and maintenance. The ability for the conveyors to go parallel to the ground gives the operator more control over dust and wind, while also allowing for easier maintenance. The TR5300 features a maintenance access platform for the Deutz TD 2.9L Tier 4 Final (Stage IV), 74 hp (55 kW) engine.

Features may include:

Added rigidity to screens

With the ability to tension the screen around the drum, operators can add rigidity to the screens. This design allows the use of smaller gauge wire, ultimately increasing the open area of the screen to help improve productivity.

On-machine or remote control options

Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote. From either control, the operator can choose from four programmable presets or adjust machine settings based on incoming material.

Easy access to trommel drum

A set of dual-hinged doors on both sides of the machine expose the full length of the trommel drum for ground level service and removal.

Hydraulic-driven chain drive system

A hydraulic-driven chain drive system allows the drum to be lifted off the cog for service, and bolt-on sprockets can be changed quickly to help lower repair time.

Large, low-feed hopper

The TR5300 features a large, low-feed hopper that makes it easier to load with a loading ramp, making the trommel screen more mobile around the jobsite

Advanced controls

Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handdeld transceiver remote.

Photos

Highlights

  • Jasper, Georgia
  • 2024
  • Vermeer®
  • Trommel Screens TR5300
  • Model: TD2.9L
  • Available
  • Operation: 112.8 in | Drum Support Description: 4" (10.2 cm) | Head Pulley Type: 38" (96.5 cm) wide | Self-Cleaning Tail Pulley Dimensions: 38" (96.5 cm)
  • Operation: 15 ft | Hopper: 9.5 | Conveyor Belt Stacking: 15'

Specifications

  • 2024
  • Vermeer®
  • Trommel Screens
  • TR5300
  • General
  • Model: TD2.9L
  • Deutz
  • Tier 4 Final/ Stage IV
  • 4
  • Rating: 74 hp (55 kW) @ 2600 rpm and 181 ft-lb (245.4 Nm) of torque @ 1600 rpm
  • Spin-on
  • Dual element
  • Conveyor Motor: 33 cu-in
  • Consumption: 4.6
  • Single Leaf Sprung
  • 445/50R22.5
  • 950 Cold Cranking Amp Group 31
  • System Voltage: 12
  • Drum: 0-24 RPM | Fines Belt: 500 ft/min
  • Drum Operation: 0-30.9 gpm (0-117.0 L/min) | Conveyor Operation: 17 gpm
  • Heavy Duty Structural Tubing | Fines Conveyor: 2" (5.1 cm) x 8" (20.3 cm) structural steel tubing
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 34x37 | Drum Diameter: 5 ft | Drum Support Description: Eight poly trunnion rollers 8" (20.3 cm) diameter | Thrust Bearing Diameter: 4 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 0-7 degrees | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25" (3.2 cm) sealed ball bearings | Head Pulley Type: 12" (30.5 cm) diameter | Head Pulley Bearing: 2 7/16" (6.2 cm) pillow block | Self-Cleaning Tail Pulley Dimensions: 10" (25.4 cm) diameter, 2.4" (6.1 cm) shaft | Head Pulley Takeup: 10 in | Self-Cleaning Return Idlers: 4" (10.2 cm) rubber disc
  • 39 ft
  • 98.4 in
  • 13.4 ft
  • Operation: 89.9 ft | Drum: 15 ft | Fines Conveyor: 55 ft
  • Operation: 112.8 in | Drum Support Description: 4" (10.2 cm) | Head Pulley Type: 38" (96.5 cm) wide | Self-Cleaning Tail Pulley Dimensions: 38" (96.5 cm)
  • Operation: 15 ft | Hopper: 9.5 | Conveyor Belt Stacking: 15'
  • Bottom: 34 in
  • 36 in
  • 44 gal
  • Oil Volume with Filter: 8.4 qt
  • 100 cu yd (76.5 m3) per hr with .5" (12.7 mm) screens installed and material with moisture less than 40%
  • Tank: 55 gal
  • Radiator Fan: Suction | Drum Drive Chain: 140 custom extended pin | Maximum Screen Panels: 4 | Head Pulley Type: Rubber lagged | Troughing Idler Type: 20° CEMA "B" with permanently sealed bearings | Self-Cleaning Return Idlers: qty 8
  • 5.5 cu yd
  • 32000 lbs | Hitch: 11600 lbs
  • Recommended: Mobil 15W40
  • Bristle: Polyethylene