2025 Vermeer® Trommel Screens TR5300

Current Vermeer® Recycling Trommel Screens

Swipe to View More

Year 2025
Make Vermeer®
Model Trommel Screens
Engine Model: TD2.9L

Year 2025
Manufacturer Vermeer®
Model Name Trommel Screens
Trim Name TR5300
Generic Type (Primary) General
Cylinder Liners 4
Engine Manufacturer Deutz
Oil Filter Spin-on
Air Cleaner Dual element
Engine Model: TD2.9L
Emissions Tier 4 Final/ Stage IV
Engine Power Rating: 74 hp (55 kW) @ 2600 rpm and 181 ft-lb (245.4 Nm) of torque @ 1600 rpm

From either control, the operator can choose from four programmable presets or adjust machine settings based on incoming material.

Operators can control the machine through either the Vermeer DP10 display mounted on the control panel.

The TR5300 features a large, low feed height hopper that makes it easier to load with a loading ramp, making the trommel screen more mobile around the jobsite.

The hydraulic-driven chain drive system provides positive drum drive and allows the drum to lift off of the cog for service and maintenance.

From the dual-hinged doors on either side of the machine, you can perform machine maintenance efficiently through ease of access to components such as motor, trommel drum and drum drive.

Without having to change out the drum, you can adjust the screen panel quickly which will allow operators to change opening size, wire gauge and type of wire so you can separate a wide variety of material.

Features may include:

High productivity in a compact size

Minimize overall maintenance time

Complete control for overall jobsite confidence

Engine

Cylinder Liners 4

Engine Manufacturer Deutz

Oil Filter Spin-on

Air Cleaner Dual element

Engine Model: TD2.9L

Emissions Tier 4 Final/ Stage IV

Engine Power Rating: 74 hp (55 kW) @ 2600 rpm and 181 ft-lb (245.4 Nm) of torque @ 1600 rpm

Motor

Displacement Conveyor Motor: 33 cu-in

Fuel System

Fuel System Consumption: 4.6

Suspension

Suspension Single Leaf Sprung

Wheels & Tires

Tires, Rear Specification 445/50R22.5

Battery

Battery 950 Cold Cranking Amp Group 31

Electric

Electrical System Voltage: 12

Operational

Operating Speed Drum: 0-24 RPM | Fines Belt: 500 ft/min

Hydraulics

Hydraulic Pump Drum Operation: 0-30.9 gpm (0-117.0 L/min) | Conveyor Operation: 17 gpm

Chassis

Frame Type Heavy Duty Structural Tubing | Fines Conveyor: 2" (5.1 cm) x 8" (20.3 cm) structural steel tubing

Dimensions

Conveyer Width 36 in

Transport Length 39 ft

Transport Width 98.4 in

Transport Height 13.4 ft

Hopper Width Bottom: 34 in

Length Operation: 89.9 ft | Drum: 15 ft | Fines Conveyor: 55 ft

Height Operation: 15 ft | Hopper: 9.5 | Conveyor Belt Stacking: 15'

Width Operation: 112.8 in | Drum Support Description: 4" (10.2 cm) | Head Pulley Type: 38" (96.5 cm) wide | Self-Cleaning Tail Pulley Dimensions: 38" (96.5 cm)

Dimensions Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 34x37 | Drum Diameter: 5 ft | Drum Support Description: Eight poly trunnion rollers 8" (20.3 cm) diameter | Thrust Bearing Diameter: 4 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 0-7 degrees | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25" (3.2 cm) sealed ball bearings | Head Pulley Type: 12" (30.5 cm) diameter | Head Pulley Bearing: 2 7/16" (6.2 cm) pillow block | Self-Cleaning Tail Pulley Dimensions: 10" (25.4 cm) diameter, 2.4" (6.1 cm) shaft | Head Pulley Takeup: 10 in | Self-Cleaning Return Idlers: 4" (10.2 cm) rubber disc

Capacities

Fuel Capacity 44 gal

Hopper Capacity 5.5 cu yd

Hydraulic Capacity Tank: 55 gal

Features Chassis: 20000 lbs

Oil capacity Oil Volume with Filter: 8.4 qt

Volume 100 cu yd (76.5 m3) per hr with .5" (12.7 mm) screens installed and material with moisture less than 40%

Weights

Weight 32000 lbs | Hitch: 11600 lbs

Features

Construction Material Bristle: Polyethylene

Oil Type Recommended: Mobil 15W40

2025 Vermeer® Trommel Screens TR5300