Current Vermeer® Recycling Trommel Screens

2024 Vermeer® Trommel Screens TR521

2024 Vermeer® Trommel Screens TR521

Swipe to View More

  • Year 2024
  • Make Vermeer®
  • Model Trommel Screens
  • Engine Model: QSB 3.8l
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2024 Vermeer® Trommel Screens TR521

2024 Vermeer® Trommel Screens TR521

  • Year 2024
  • Manufacturer Vermeer®
  • Model Name Trommel Screens
  • Trim Name TR521
  • Generic Type (Primary) General
  • Engine Manufacturer Cummins
  • Engine Model: QSB 3.8l
  • Emissions Tier 4 Final
  • Cylinder Liners 4
  • Engine Power Rating: 120 hp
  • Oil Filter Spin-on
  • Air Cleaner Dual element

2024 Vermeer® Trommel Screens TR521

The TR521 Tier 4F Stage IV trommel screen is specifically designed to separate by size a wide variety of materials such as compost, soil, sands, gravel, light aggregate and sludge. Screen enhancements to the drum enable quicker and simpler changeout and tensioned screens allow for increased overall open screen area. The revamped TR521 with wireless remote control offers intelligence to the machine for operational setting control and allows the operator to monitor from a loader cab or distant location.

Features may include:

Tall, wide throat opening

Move material smoothly without bridging, thanks to a tall, wide throat opening.

Heavy-duty rollers

Extend belt life even under tough loading conditions with closely set, heavy-duty rollers supporting the apron conveyor.

Increasing screening area

Keep screen weights low when processing wet materials by clamping on a smaller diameter tension screen wire and increasing screening area.

Reduced spillage

Speed up your clean up because the flashing and sheeting fit tightly against the drum and conveyors to reduce spillage.

Advanced controls

Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote.

Stainless steel screen options

Stainless steel screens offer increased durability and reduce the amount of screen binding when working with wet or corrosive materials.

Engine

Engine Manufacturer Cummins
Engine Model: QSB 3.8l
Emissions Tier 4 Final
Cylinder Liners 4
Engine Power Rating: 120 hp
Oil Filter Spin-on
Air Cleaner Dual element

Motor

Displacement Drum: 48.8 cu in (800 cu cm) displacement | Conveyor: 28.3 cu-in

Fuel System

Fuel System Fuel Consumption: 3.1 gph (11.7 L/hr)

Suspension

Suspension Leaf spring

Wheels & Tires

Tires, Rear Specification 235-75R 17.5 H qty 8

Battery

Battery 950 CCA

Electric

Electrical System Voltage: 12 V, 134 amp alternator

Operational

Operating Speed Apron Conveyor: 0-35 fpm (0-10.7 m/min) | Drum: 0-24 rpm | Fines Belt: 515 ft/min

Hydraulics

Hydraulic Pump Operation: 62.9 gpm @2500 psi (238.1 L/min @ 172.4 bar) | Drum Operation: 0-33.1 gpm (0-125.3 L/min)

Chassis

Frame Type Four independent hydraulic jacklegs | Fines Conveyor: Part of trailer frame | Fines Conveyor: 4" x 8" (10.2 cm x 20.3 cm)

Dimensions

Dimensions Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 13.2' x 5' (4 m x 1.5 m) | Apron Conveyor Rollers: 6" (10.2 cm) diameter | Drum Diameter: 5 ft | Drum Support Description: 8 in (20.3 cm) diameter | Thrust Bearing Diameter: 5 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 3-5 degrees | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25" (3.2 cm) sealed ball bearings | Head/Tail Pulley Type: 12" (30.5 cm) diameter | Head Pulley Bearing: 2.5" (6.4 cm) pillow block | Rubber Flashing: Adjustable, .25" (.64 cm) thick, 4" (10.16 cm) | Tail Pulley Takeup: 12 in | Self-Cleaning Return Idlers: 7, each 4" (10.2 cm) diameter | Head Pulley Type: 12" (30.5 cm) diameter | Self-Cleaning Tail Pulley Dimensions: 10" (25.4 cm) diameter, 2.4" (6.1 cm) shaft | Tail Pulley Takeup: 12 in | Conveyor Belt Type: 220 lb (99.8 kg), 2-ply, 3/16" x 1/16" (4.8 mm x 1.6 mm)
Transport Length 46.5 ft
Transport Width 102 in
Transport Height 13.1 ft
Length Operation: 86 ft | Apron Conveyor: 15 ft | Drum: 21 ft | Fines Conveyor: 65 ft
Width Operation: 102 in | Apron Opening: 37 in | Apron Conveyor Belt: 42 in | Drum Support Description: 4 in (10.2 cm) | Head Pulley Type: 38" (996.5 cm) | Self-Cleaning Tail Pulley Dimensions: 38" (96.5 cm) wide with
Height Operation: 15.9 ft | Apron Opening: 34 in | Hopper: 9.5' (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 14.5' with drum at 4 degree
Hopper Width Bottom: 34 in
Conveyer Width Conveyor Belt: 36 in

Capacities

Volume Approximately 150 cu yd (114.7 m³) per hr with .5" (1.3 cm) screens installed and material with moisture less than 40%
Fuel Capacity 73 gal
Hydraulic Capacity Tank: 157 gal
Features Chassis: 22500 lbs
Hopper Capacity 5 cu yd

Weights

Weight 39700 lbs | Hitch: 13400 lbs

Features

Oil Type Recommended: Mobil 15W40
Features Radiator Fan: Suction | Apron Conveyor Rollers: qty. 13 | Drum Drive Chain: 120 WT | Maximum Screen Panels: 6 | Head/Tail Pulley Type: Rubber-lagged | Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (61 cm) centers | Head Pulley Type: Rubber lagged | Troughing Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers
Construction Material Drum Support Description: Four steel trunnion rollers | Bristle: Polyethylene | Fines Conveyor Frame: structural steel tubing

Product Photography