Current Vermeer® Recycling Horizontal Grinders

2025 Vermeer® Horizontal Grinders HG6000

2025 Vermeer® Horizontal Grinders HG6000

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Horizontal Grinders
  • Engine C18
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2025 Vermeer® Horizontal Grinders HG6000

2025 Vermeer® Horizontal Grinders HG6000

  • Year 2025
  • Manufacturer Vermeer®
  • Model Name Horizontal Grinders
  • Trim Name HG6000
  • Generic Type (Primary) Horizontal
  • Engine Manufacturer Caterpillar
  • Engine C18
  • Emissions Tier 3
  • Cylinder Liners 6
  • Engine Power Gross (Maximum): 630 hp
  • Air Cleaner Dry type with primary & secondary elements and restriction indicator
  • Oil Filter Spin-on
  • Cooling Medium: Liquid

2025 Vermeer® Horizontal Grinders HG6000

Maximize loading speed and productivity using the patented SmartGrind system and hydraulic feed roller down pressure. Open-ended, wide infeed tables are designed to make over-the-side loading easy and efficient.

The Series III duplex drum is built off the proven cutting performance of previous Vermeer duplex drum designs and makes maintenance more convenient with enhancements such as an independently secured wedge system and enhanced drum balancing.

A 60-in (152.4-cm) wide infeed table with flared sidewalls can accommodate a large volume of material.

The intelligent feed system monitors the machine's engine speed, and holds the engine at an optimal level. This allows you to spend more time feeding and less time adjusting settings.

Machine damage caused by metal contaminants entering the hammermill can be costly. The Vermeer Damage Defense system helps protect your machine by detecting certain metal contaminants.

An industry-leading, full-function, wireless remote control lets you adjust machine settings from the cab as conditions change, including control of the infeed settings, engine droop, conveyor height and more.

The feed roller planetary is fully enclosed for protection from debris and offers a tighter clearance between the feed roller and mill housing, helping reduce material blockage and drag on the feed roller circuit.

Reduce the quantity and distance of thrown material debris with the Thrown Object Deflector (TOD), strategically placed to reduce interference when loading over-length material.

Features may include:

  • Bring more versatility to your wood waste processing operation
  • Maintenance-friendly design optimizes serviceability
  • Equipped with Vermeer innovations to help protect your investment and optimize efficiency

Engine

Engine Manufacturer Caterpillar
Engine C18
Emissions Tier 3
Cylinder Liners 6
Engine Power Gross (Maximum): 630 hp
Air Cleaner Dry type with primary & secondary elements and restriction indicator
Oil Filter Spin-on
Cooling Medium: Liquid

Fuel System

Fuel System Max Fuel Consumption: 34.6 gph
Fuel Type Diesel

Suspension

Suspension Type: Leaf spring suspension

Drivetrain

Clutch PT Tech | Engagement: Hydraulic-operated wet clutch with PTO
Drive System Radial piston motor | Drive Motor: Fixed displacement, Geroler | Planetary: Two options (HD - 26.18:1) (STD - 34.2:1)

Brakes

Brake System Type Air-actuated with spring-applied parking brake

Battery

Battery Group 8-D, 1155 CCA (Qty 2) | System Protection: Fused | AA (qty 6)

Operational

Operating Speed Drum: 1086 rpm | Belt: 780 ft/min

Performance

Noise Level 119.8 dB(A) - deluxe exhaust system

Hydraulics

Hydraulic Type Filtration Method: Dual in-tank return filters (B5=200) | system: Open-loop, pressure- and flow-compensated | discharge conveyor system type: Open-loop / fan: Open-loop, pressure- and flow-compensated
Pump Type Variable displacement, axial piston | discharge conveyor: Fixed displacement, gear pump / fan: Variable displacement, axial piston
Hydraulic Pump Pump Flow at Maximum RPM: 32.4 | discharge conveyor Pump Flow at Maximum RPM:: 25.7 gpm / fan: 36.2 gpm
Hydraulic Flow Pump Flow at Maximum RPM: 12.4 gpm
Maximum Pressure System Relief Pressure: 3000 / 4500 | System relief pressure: 260 psi

Chassis

Frame Type Fifth wheel

Lights and Safety

Lighting Trailer Type: 12-24V LED

Dimensions

Dimensions Feed opening: 32-in (81.3-cm) high x 56.4-in (143.3-cm) wide | Infeed Roller Diameter: 36.1 in | Drum Diameter: 28 in | Tip Diameter: 36.4 in | Drum Skin Thickness: 1.5 in | Bearing - Inner Race Diameter: 5.5 in | Center Retention Pin Dimensions: 2" diameter x 75.3" L (5.1 cm diameter x 191.3 cm L) | Knife Thickness: .625 in (1.6 cm) | Shaft diameter: 6.5 in | Screen Dimensions: 3/4" (1.9 cm) thick | Screen Area: 3317 sq in | Liner Dimensions: 1" thick x 5.6" W x 65.4" L (2.5 cm thick x 14.2 cm W x 166.1 cm L) | Idler Roller Diameter: 12 in | Standard Drive Roller Diameter: 12.8 in | Magnetic Drive Roller Diameter: 12.8 in | Operating Range: Up to 300' (91.4 m)
Transport Length Maximum: 38.8 ft
Transport Width Maximum: 8.2 ft
Transport Height Maximum: 13.1 ft
Width Feed Table: 60 in | Infeed Roller: 56.4 in | Millbox Opening: 60" | single belt: 48 in
Length Feed Table: 20 ft | Infeed Roller: 47.2 in | single belt: 81.3 ft
Height Maximum Feed: 32 in | Millbox Opening: 32" | Load: 14 ft
Depth, Maximum Adjustable: .125 in (.31 cm) to 1 in (2.5 cm)
Cutting Width Drum: 62.4 in

Capacities

Fuel Capacity 300 gal
Hydraulic Capacity 100 gal
Features Clutch Tank capacity: 18 gal | per Axle: 25000 lbs

Weights

Weight 65000 lbs | Tongue: 21000 lbs | Axle: 44000 lbs | Infeed roller weight with arm: 3350 lbs / 3483 lbs | Drum: 4741 lbs / 5946 lbs

Features

Features Tooth Design: Serrated bars | Number of Teeth: 13 bars | Feed Roller Down Pressure: Adjustable | Bearing Type: Double row, spherical roller | Number of Hammers: 10 | Number of Tips: 20 | Tip types: Premium wide | Useable Edges: 1 | Number of Pockets: 14 | Shaft Retention Type: Keyless bushing | Number of Screens: 2 | Number of Sides: 1 | Return Roller Quantity: 4 | Idler Roller Bearing: 1-15/16, 4-bolt flange | Number of Coolers: 2 / clutch: 1 | clutch Filtration Method: Spin-on, pressure filter, B6 = 1000 | Display Type: LCD | Gauges: Two, fuel level and hydraulic pressure | Switches: Moisture-proof, toggle style / Sealed membrane | Radio remote type: R424 | Channel: Unit body construction Setting 50 channels | Number of Axles: 3
Oil Type hydraulic: Vermeer HyPower 68 | clutch Recommended: VMF Gold
Belt Type single: 3 ply - 330# or straight warp single ply 330# both with V cleat
Construction Material Flare: Integrated with infeed | Steel | Drive Roller: Welded steel | Front Idler Roller: Self-cleaning steel auger | Infeed Floor: Welded steel with replaceable UHMW wear plates | Fabricated steel | chipper drum: A8 mod chipper steel | Screen Type: Fabricated out of abrasion-resistant steel | Millbox lid liner: Abrasion-resistant steel | Millbox Lid Liner Dimensions: Abrasion resistant steel | Anvil Type: Fabricated steel with replaceable wear surfaces | Splice: R2-stainless steel or Super splice
Conveyor Type Feed: Welded slat chain
Knife Quantity 28 | Number of Bolts/Knife: 2

Product Photography