2025 Vermeer® Trommel Screens TR626

Current Vermeer® Landscape Trommel Screens

Swipe to View More

Year 2025
Make Vermeer®
Model Trommel Screens
Engine Model: 4045H

Shop Vermeer® Pre-Owned

Product Details Specifications Photos

Year 2025
Manufacturer Vermeer®
Model Name Trommel Screens
Trim Name TR626
Generic Type (Primary) General
Cylinder Liners 4
Emissions Tier 3
Oil Filter Spin-on
Engine Manufacturer John Deere
Engine Model: 4045H
Air Cleaner Dual element oversized
Engine Power Rating: 125 hp (93.2 kW) @ 2400 rpm, 355 ft-lb (481.3 Nm) of torque @ 1500 rpm

Forget the loading ramps with the help of the low hopper infeed height of the TR626 trommel screen.

Move material smoothly without bridging, thanks to a tall, wide throat opening.

Startup delay and alarm systems notify your whole crew when the machine is about to start.

Tensioning the screens allows for maximum strength with a finer wire gauge, optimizing production through increased open area. In high moisture applications, the use of stainless-steel screens can be very useful.

The fines conveyor can have straight discharge or ordered with 180-degree radial arc. Both offer adjustable stacking height to help reduce material loss and reduced dust in windy condition.

Can be ordered with 20-ft or 28-ft (6.1 m or 8.5 m) length, with standard or magnetic head pulley and are fully height adjustable to help reduce dust and material loss in windy conditions.

Operators can control the machine through either the Vermeer DP10 display mounted on the control panel.

Features may include:

Load your machine with convenience and confidence

Complete control allows for increased efficiency when it matters most

Spend less time on maintenance and more time being productive

Fine conveyor

Overs conveyor

Engine

Cylinder Liners 4

Emissions Tier 3

Oil Filter Spin-on

Engine Manufacturer John Deere

Engine Model: 4045H

Air Cleaner Dual element oversized

Engine Power Rating: 125 hp (93.2 kW) @ 2400 rpm, 355 ft-lb (481.3 Nm) of torque @ 1500 rpm

Motor

Displacement Drum: 48.8 cu in (800 cu cm) displacement | Conveyor: 38.4 cu-in | Conveyor Motor Displacement: 21.4 cu-in

Fuel System

Fuel System Fuel Consumption: 3.5 gph (13.3 L/hr) under most operating conditions

Suspension

Suspension Leaf spring

Wheels & Tires

Tires, Rear Specification 235-75R 17.5H qty. 4

Battery

Battery 950 cold cranking amps

Electric

Electrical System Voltage: 12 V, 120 amp alternator

Operational

Hydraulics

Hydraulic Pump 62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa]) | Drum Operation: 0-42.6 gpm (161.3 L/min)

Chassis

Frame Type 4 independent hydraulic jacklegs | Fines Conveyor Frame: Part of trailer frame

Dimensions

Transport Length 54.5 ft

Transport Width 113 in

Transport Height 13.5 ft

Conveyer Width Belt: 36 in

Hopper Width Bottom: 48 in

Height Operation: 15.9 ft | Apron Opening: 34 in | Hopper: 9.5' (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 16.6' (5.1 m) with drum at 4 degrees | Conveyor Belt Stacking: 3' (.9 m) x 10' (3.1 m)

Dimensions Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 13.2' x 5.3' (4 m x 1.6 m) | Apron Conveyor Rollers: 4" (10.2 cm) diameter | Drum Diameter: 6 ft | Drum Support Description: Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width | Thrust Bearing Diameter: 5 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 0-7 degrees | Brush Diameter: 14 in | Head/Tail Pulley Type: Rubber-lagged, 12" (30.5 cm) diameter | Head Pulley Bearing: 2.5" (6.4 cm) pillow block | Rubber Flashing: Adjustable, .25" (6.44 cm) thick, 4" (10.2 cm) | Tail Pulley Takeup: 12 in | Self-Cleaning Return Idlers: 6, each 4" (10.2 cm) diameter | Head Pulley Type: Rubber lagged, 12" (30.5 cm) diameter | Self-Cleaning Tail Pulley Dimensions: 10" (25.4 cm) diameter, 2.4" (6.1 cm) shaft | Self-Cleaning Return Idlers: 11, each 4" (10.2 cm) diameter | Fines Conveyor Frame: 4" x 8" (10.2 cm x 20.3 cm) | Conveyor Belt Type: 150 lb (99.8 kg), 2 ply, 1/32" x 1/32" (.8 mm x 0.8 mm) | Fines Conveyor Frame: 2" x 8" (5.1 cm x 20.3 cm) structural steel building | Conveyor Belt Size: 48" (121.9 cm) wide with raised crescent | Conveyor Belt Type: 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) | Self-Cleaning Tail Pulley Dimensions: 10" (25.4 cm) diameter, 51" (129.5 cm) wide with 2.4" (6.1 cm) shaft | Tail Pulley Takeup: 12 in | Solid Return Idler Size: 4" x 8" diameter | Overs Conveyor Frame: 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing

Capacities

Hopper Capacity 6 cu yd

Fuel Capacity Tank: 100 gal

Hydraulic Capacity Tank: 200 gal

Features Chassis: 22500 lbs

Oil capacity Oil Volume with Filter: 15.5 qt

Volume Approximately 200 cu yd (152.9 cu m) per hour with .5" (1.3 cm) screens installed and material with moisture less than 40%

Weights

Weight 65000 lbs | Hitch: 30000 lbs

Features

Features Radiator Fan: Pusher type | Apron Conveyor Rollers: qty. 14 | Drum Drive Chain: 140 WT | Maximum Screen Panels: 8 | Brush Assembly Support: Two 1.25" (3.2 cm) sealed ball bearings | Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers | Troughing Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers | Head/Tail Pulley Type: Rubber lagged, crowned | Idler Type: 30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104 cm) centers

Construction Material Bristle: Polyethylene | Fines Conveyor Frame: structural steel tubing | Conveyor Belt Type: vulcanized | Head Pulley Type: Rubber lagged | Overs Conveyor Frame: structural steel tubing

2025 Vermeer® Trommel Screens TR626